Domain - Engines
TOP > Engineering and Technology > Motor Industry > Engines
| 0 Qualifications | 110 Assessment Standards (107 Units & 3 Skills) | View Education Organisations with Consent to Assess |
Qualifications Domain-full
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Hide education organisations, CMR & purpose »
Level 2
Demonstrate knowledge of the construction and operation, and servicing requirements of outboard engines
Version 5
15436 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the trailer boat repair industry. People credited with this unit standard are able to demonstrate knowledge of: outboard engine construction and operation; and outboard engine servicing requirements.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of automotive cooling systems
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 24269 were replaced by unit standard 30480. This unit standard and unit standard 21717 replaced unit standard 236.
21686 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of engine cooling system operation, and how to identify the coolant''s condition and how to dispose of it.
Standard-setting body:
Demonstrate knowledge of basic tuning on a four stroke petrol engine
Version 4
21687 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe carrying out a pre-tuning visual inspection and service and demonstrate knowledge of servicing an ignition system, servicing the air and fuel filters, checking and adjusting valve clearances, and checking and adjusting engine idle speed and exhaust emissions.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of disassembling and reassembling a four stroke multi-cylinder engine
Version 4
21688 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of disassembling, and reassembling a four stroke multi-cylinder engine to a running state.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Disassemble and reassemble a single cylinder or multi-cylinder four-stroke engine under supervision
Version 3
21691 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people who wish to gain experience on the mechanics of engines. People credited with this unit standard are able to: disassemble, and reassemble, a single cylinder or multi-cylinder four-stroke engine under supervision.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Service automotive cooling systems
This standard has expired and is no longer available.
Version 4 This unit standard was replaced by unit standard 30479. This unit standard and unit standard 21686 replaced unit standard 236.
21717 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to service an indirect (coolant filled) automotive cooling system, and determine the condition of the coolant and renew to specifications.
Standard-setting body:
Demonstrate knowledge of the operation of two and four stroke petrol and diesel engines
This standard has expired and is no longer available.
Version 11 This unit standard was replaced by unit standard 30477.
231 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people who wish to enter or are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of spark ignition (SI) engine operation, compression ignition (CI) engine operation, and engine capacity and performance ratings.
Standard-setting body:
Demonstrate knowledge of manual starting systems used on small engines
Version 2 This unit standard and unit standard 24277 replaced unit standard 928.
24276 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of manual starting systems used on small engines.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out basic tuning on a four stroke petrol engine under supervision
Version 10
243 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: perform a pre-tuning visual inspection and service; service an ignition system; service the air and fuel filters; check and adjust valve clearances; and check engine idle speed on a four stroke petrol engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Disassemble and reassemble a four stroke multi-cylinder engine to a running state
Version 11
244 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to disassemble, and reassemble a four stroke multi-cylinder engine to a running state.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and rectify governor faults on a small engine
Version 6
940 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: inspect governor operation; and rectify governor faults on a small engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Level 3
Inspect and service outboard engines
Version 4
15437 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the trailer boat repair industry. People credited with this unit standard are able to: inspect outboard engines for condition and operation; and carry out outboard engine service.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of the operation and servicing of open and closed cooling systems on trailer boats
Version 4
15439 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of open and closed engine cooling system operation, and cooling system servicing.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Overhaul an engine cooling system water pump
This standard has expired and is no longer available.
Version 4
15441 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: disassemble a water pump and complete an inspection report; and rectify water pump faults, fit replacement kit, and reassemble water pump.
Standard-setting body:
Diagnose and rectify motorcycle engine piston and cylinder assembly faults
This standard has expired and is no longer available.
Version 3 This unit standard and unit standard 15442 were replaced by unit standard 31437.
15445 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to diagnose motorcycle engine cylinder and piston assembly faults and their causes, and rectify motorcycle cylinder and piston assembly faults.
Standard-setting body:
Remove and fit a light vehicle engine cam belt
Version 4
15446 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: remove a cam belt from a light vehicle engine; and fit a cam belt to a light vehicle engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Install a replacement engine in a trailer boat
Version 4
15447 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the trailer boat repair industry. People credited with this unit standard are able to: assess the suitability of a trailer boat for repowering; and install a replacement engine in a trailer boat.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Remove and install vehicle engine exterior components
Version 4
19636 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to remove vehicle engine exterior components, install vehicle engine exterior components, and check installed vehicle engine exterior components.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove an engine assembly from, and install the assembly in, a heavy vehicle
This standard has expired and is no longer available.
Version 4
2334 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to remove an engine assembly from a heavy vehicle, and install an engine assembly in a heavy vehicle.
Standard-setting body:
Demonstrate knowledge of cooling system operation, and factors that affect system efficiency on vehicles or machines
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 21686 were replaced by unit standard 30480. This unit standard, unit standard 24270, and unit standard 24271 replaced unit standard 878, unit standard 965, and unit standard 3391.
24269 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of cooling system operation, and factors that affect cooling system efficiency on vehicles or machines.
Standard-setting body:
Carry out general repairs to a cylinder head that does not require machining
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24807 were replaced by unit standard 30888. This unit standard and unit standard 24807 replaced unit standard 923 and unit standard 15440.
24274 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to carry out general repairs to a cylinder head that does not require machining.
Standard-setting body:
Disassemble, inspect, and reassemble an engine short block under general supervision
Version 2 This unit standard and unit standard 24306 replaced unit standard 925.
24275 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: disassemble and inspect an engine short block; and reassemble an engine short block, under general supervision.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Inspect manual starting system components and rectify component faults on a small engine
Version 2 This unit standard and unit standard 24276 replaced unit standard 928.
24277 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive and related repair industries who are required to repair small engines. People credited with this unit standard are able to: inspect manual starting system components on a small engine; and rectify faulty manual starting system components on a small engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of motorcycle engine cooling systems and testing motorcycle engine cooling systems
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24286 replaced unit standard 15443.
24285 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to demonstrate knowledge of motorcycle engine cooling systems, and testing motorcycle engine cooling systems.
Standard-setting body:
Diagnose and rectify faults in a motorcycle engine cooling system
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24285 replaced unit standard 15443.
24286 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to: diagnose and locate faults in a motorcycle engine cooling system; rectify motorcycle engine cooling system faults; test the motorcycle engine cooling fan assembly for correct operation and rectify faults; and replace a motorcycle engine cooling fan assembly.
Standard-setting body:
Demonstrate knowledge of disassembling, inspecting, and reassembling an engine short block
Version 2
24287 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: disassembling and inspecting an engine short block; and reassembling an engine short block.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Inspect and service auxiliary engines on heavy vehicles or equipment
This standard has expired and is no longer available.
Version 2
24290 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to inspect auxiliary engines for condition and operation on heavy vehicles or equipment, and carry out auxiliary engine service on heavy vehicles or equipment.
Standard-setting body:
Demonstrate knowledge of inspecting and machining engine piston and connecting rod assemblies
This standard has expired and is no longer available.
Version 2
24291 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive machining industry. People credited with this unit standard are able to demonstrate knowledge of inspecting and machining piston and connecting rod assemblies.
Standard-setting body:
Demonstrate knowledge of small engine air cooling systems and their test and service procedures
This standard has expired and is no longer available.
Version 2
24295 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the small engine repair industry. People credited with this unit standard are able to demonstrate knowledge of small engine air cooling systems, and checking small engine air cooling systems.
Standard-setting body:
Test and rectify faults in a small engine air cooling system
This standard has expired and is no longer available.
Version 2
24296 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the small engine repair industry. People credited with this unit standard are able to: test a small engine air cooling system and locate and identify any faults; rectify small engine air cooling system faults; test the cooling fan assembly for correct operation and rectify faults, and replace a small engine air cooling fan assembly.
Standard-setting body:
Demonstrate knowledge of engine gasket and sealant options
This standard has expired and is no longer available.
Version 2
24297 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of engine gasket and sealant options.
Standard-setting body:
Check a motorcycle engine for condition and carry out engine tuning requirements
Version 2
24300 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the motorcycle repair industry. People credited with this unit standard are able to: check a motorcycle engine for condition; and carry out engine tuning requirements.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Disassemble, inspect, and reassemble a multi-cylinder motorcycle engine
This standard has expired and is no longer available.
Version 2
24301 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to: disassemble a multi-cylinder motorcycle engine; inspect and determine the condition of components; and reassemble and adjust components.
Standard-setting body:
Demonstrate knowledge of disassembling, inspecting, and reassembling an engine cylinder head
Version 2
24302 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: disassembling and inspecting an engine cylinder head; and reassembling an engine cylinder head.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Carry out general repairs to an engine short block
Version 2 This unit standard and unit standard 24275 replaced unit standard 925.
24306 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to carry out general repairs to an engine short block.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Remove, disassemble, inspect, reassemble, and refit an engine cylinder head
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 24274 were replaced by unit standard 30888. This unit standard and unit standard 24274 replaced unit standard 923 and unit standard 15440.
24807 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: remove a cylinder head from an engine; disassemble, inspect, and reassemble the cylinder head; and refit a cylinder head to an engine.
Standard-setting body:
Demonstrate knowledge of petrol and diesel engines
Version 1 This unit standard replaced unit standard 231.
30477 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people who are employed in the motor industry. People credited with this unit standard are able to demonstrate knowledge of engine operation and performance.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Service an automotive cooling system
Version 1 This unit standard replaced unit standard 21717.
30479 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to test and service an automotive cooling system.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive cooling systems and engine coolant
Version 1 This unit standard replaced unit standard 21686 and unit standard 24269.
30480 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motor industry. People credited with this unit standard are able to demonstrate knowledge of automotive cooling systems and engine coolant.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of replacing automotive timing belts and chains
Version 1
30889 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of replacing automotive timing belts and chains.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of equipment used to test engine mechanical condition
Version 1
30890 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of the equipment used to test engine mechanical condition.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe engine disassembly, inspection and reassembly
Version 1
30891 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe: engine cylinder head removal, inspection and refitting; and engine cylinder block disassembly, inspection and reassembly.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe diesel engine tuning
Version 1
31221 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe diesel engine tuning.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe petrol engine tuning
Version 1
31222 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe petrol engine tuning.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of a diesel engine braking system and an exhaust brake
Version 1
31223 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of a diesel engine braking system, and an exhaust brake.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Describe heavy diesel engine cylinder head removal, inspection and refitting
Version 1
31224 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to describe the removal, inspection and refitting of a heavy diesel engine cylinder head.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of manual starting systems
Version 1
31440 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of manual starting systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Check a four stroke petrol engine for condition using hand held test equipment
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 24273 were replaced by unit standard 30886.
3400 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: perform a visual inspection of a four stroke petrol engine and secure components; carry out a compression test on a four stroke petrol engine; carry out a cylinder leakage test on a four stroke petrol engine; and carry out a vacuum test on a four stroke petrol engine.
Standard-setting body:
Test and rectify diesel engine glow plug starting aid system faults
Version 5
929 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to test and rectify diesel engine glow plug starting aid system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Remove and install an engine assembly from and to a light vehicle
Version 5
943 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: remove an engine assembly from a light vehicle; prepare an engine compartment of a light vehicle for engine assembly installation; and install an engine assembly in a light vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Level 4
Inspect and machine engine camshafts
This standard has expired and is no longer available.
Version 4
11723 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive machining industry. People credited with this unit standard are able to inspect and machine an engine camshaft.
Standard-setting body:
Inspect and machine an engine crankshaft
Version 4
11725 Unit Standard 25 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive machining industry. People credited with this unit standard are able to inspect and machine an engine crankshaft.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of engine design factors and machining practices
This standard has expired and is no longer available.
Version 6
11726 Unit Standard 20 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of engine design factors, and engine machining practices.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Recondition engine cylinder heads
Version 4
11727 Unit Standard 12 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to recondition engine cylinder heads; and recondition engine cylinder heads.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Recondition engine cylinder blocks
Version 4
11728 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: prepare to recondition engine blocks; and recondition engine blocks.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Inspect and machine engine piston and connecting rod assemblies
Version 4
11729 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to inspect and machine engine piston and connecting rod assemblies.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify inboard four stroke diesel engine faults on trailer boats
This standard has expired and is no longer available.
Version 4
15434 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the trailer boat repair industry. People credited with this unit standard are able to diagnose inboard four stroke diesel engine faults on trailer boats, and rectify inboard four stroke diesel engine faults on trailer boats.
Standard-setting body:
Diagnose and rectify inboard petrol engine faults on trailer boats
Version 4
15435 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the trailer boat repair industry. People credited with this unit standard are able to: diagnose inboard petrol engine faults on trailer boats; and rectify inboard petrol engine faults on trailer boats.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Diagnose and rectify outboard engine faults
Version 4
15438 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the trailer boat repair industry. People credited with this unit standard are able to: diagnose outboard engine faults; and rectify outboard engine faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Carry out repairs to a motorcycle cylinder head
This standard has expired and is no longer available.
Version 4 This unit standard and unit standard 15445 were replaced by unit standard 31437.
15442 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to: disassemble and inspect a motorcycle engine cylinder head; rectify motorcycle engine cylinder head faults; and reassemble a motorcycle engine cylinder head.
Standard-setting body:
Repair a motorcycle engine crankshaft assembly
Version 3
15444 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: diagnose motorcycle engine crankshaft assembly faults and their causes; repair a composite crankshaft assembly; and repair a solid crankshaft.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Rectify fuel injection pump drive faults on diesel engines
Version 4
2313 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to rectify fuel injection pump drive faults on diesel engines.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Repower heavy vehicles or equipment
This standard has expired and is no longer available.
Version 4
2335 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to assess the suitability of a heavy vehicle or equipment for repowering, and install a repower unit in a heavy vehicle or equipment.
Standard-setting body:
Install a repower unit in a light vehicle
Version 4
2350 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: assess the suitability of a light vehicle for repowering; and install a repower unit in a light vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Diagnose and rectify faults in vehicle or machine engine cooling systems
This standard has expired and is no longer available.
Version 2
24270 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to diagnose vehicle or machine engine cooling system faults and requirements, and rectify vehicle or machine engine cooling system faults.
Standard-setting body:
Demonstrate knowledge of diagnosing vehicle or machine cooling system faults and their causes
Version 2 This unit standard, unit standard 24269, and unit standard 24270 replaced unit standard 878, unit standard 965, and unit standard 3391.
24271 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of diagnosing vehicle or machine cooling system faults and their causes.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of automotive oscilloscope patterns and conducting a test programme on a four-stroke petrol engine
Version 2 This unit standard and unit standard 24273 replaced unit standard 886.
24272 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: automotive oscilloscope patterns; and conducting a test programme on a four-stroke petrol engine using relevant test equipment.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Test a four stroke petrol engine using relevant test equipment and determine engine condition
This standard has expired and is no longer available.
Version 2 This unit standard and unit standard 3400 were replaced by unit standard 30886. This unit standard and unit standard 24272 replaced unit standard 886.
24273 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to: conduct a test programme on a four stroke petrol engine using relevant test equipment; and determine engine condition using test results, and identify and record any remedial work needed.
Standard-setting body:
Demonstrate knowledge of engine performance testing using a dynamometer
Version 2 This unit standard, unit standard 24279, and unit standard 24280 replaced unit standard 967, unit standard 15448, and unit standard 15449.
24278 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: demonstrate knowledge of engine performance testing; and testing an engine using a chassis dynamometer and an engine dynamometer.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Tune and test a four-stroke diesel engine
Version 2 This unit standard, unit standard 24278, and unit standard 24280 replaced unit standard 967, unit standard 15448, and unit standard 15449.
24279 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: carry out a four-stroke diesel engine inspection and rectify defects prior to tuning; carry out four-stroke diesel engine tuning procedures; and test four-stroke diesel engine performance.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Test engine performance using a dynamometer and determine engine condition
Version 2 This unit standard, unit standard 24278, and unit standard 24279 replaced unit standard 967, unit standard 15448, and unit standard 15449.
24280 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: test engine performance using a dynamometer; and determine engine condition using test results.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of testing and rectifying diesel engine shutdown system faults
Version 2 This unit standard and unit standard 24282 replaced unit standard 971.
24281 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: diesel engine shutdown systems; testing and rectifying electrical and electronic diesel engine shutdown system faults; and testing and rectifying mechanical diesel engine shutdown system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Diagnose and rectify diesel engine shutdown system faults
Version 2 This unit standard and unit standard 24281 replaced unit standard 971.
24282 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: diagnose faults in an electrical and electronic diesel engine shutdown system; rectify electrical and electronic diesel engine shutdown system faults; and test and rectify mechanical diesel engine shutdown system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of diesel engine braking systems, exhaust braking systems, and diagnosing and rectifying faults
Version 2 This unit standard and unit standard 24284 replaced unit standard 2317.
24283 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to demonstrate knowledge of: engine and exhaust braking systems; diagnosing and rectifying faults in an exhaust braking system on a diesel engined vehicle; and diagnosing and rectifying faults in an engine braking system on a diesel engined vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Diagnose and rectify faults in engine braking systems and auxiliary braking systems on a heavy diesel vehicle
Version 2 This unit standard and unit standard 24283 replaced unit standard 2317.
24284 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: diagnose and rectify faults in an exhaust braking system; and diagnose and rectify faults in an auxiliary braking system on a heavy diesel vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Demonstrate knowledge of repowering heavy vehicles or equipment
This standard has expired and is no longer available.
Version 2
24288 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to demonstrate knowledge of the suitability of a heavy vehicle or equipment for repowering, and repowering a heavy vehicle or equipment.
Standard-setting body:
Diagnose and rectify faults in auxiliary engines on heavy vehicles or equipment
This standard has expired and is no longer available.
Version 2
24289 Unit Standard 5 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive heavy repair industry. People credited with this unit standard are able to diagnose auxiliary engine faults on heavy vehicles or equipment, and rectify faults in auxiliary engines on heavy vehicles or equipment.
Standard-setting body:
Demonstrate knowledge of motorcycle engine cylinder head faults, and their inspection and repair requirements
This standard has expired and is no longer available.
Version 2
24292 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to demonstrate knowledge of motorcycle engine cylinder head faults, and motorcycle engine cylinder head inspection and repair requirements.
Standard-setting body:
Demonstrate knowledge of motorcycle engine crankshaft assembly faults and their inspection and repair requirements
This standard has expired and is no longer available.
Version 2
24293 Unit Standard 1 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the motorcycle repair industry. People credited with this unit standard are able to demonstrate knowledge of motorcycle crankshaft assembly faults, and motorcycle engine crankshaft assembly inspection and repair requirements.
Standard-setting body:
Demonstrate knowledge of two-stroke petrol engine lubrication, testing and tuning
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 3 This unit standard was replaced by skill standard 40477.
24294 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: demonstrate knowledge of two-stroke petrol engine lubrication; and testing and tuning a two-stroke petrol engine.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Align bore and hone bearing tunnels
This standard has expired and is no longer available.
Version 2
24298 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive machining industry. People credited with this unit standard are able to align bore and hone bearing tunnels.
Standard-setting body:
Demonstrate knowledge of engine crankshaft and camshaft machining procedures
This standard has expired and is no longer available.
Version 2
24299 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive machining industry. People credited with this unit standard are able to demonstrate knowledge of engine crankshaft and camshaft machining procedures.
Standard-setting body:
Diagnose the mechanical condition of an engine
Version 1 This unit standard replaced unit standard 3400 and unit standard 24273.
30886 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose the mechanical condition of an engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Replace an automotive timing belt or chain
Version 1
30887 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to replace an automotive timing belt or chain.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Remove, inspect and refit a cylinder head
Version 1 This unit standard replaced unit standard 24274 and unit standard 24807.
30888 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to remove, inspect and refit a cylinder head.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair vehicle or machine cooling system faults
Version 1 This unit standard replaced unit standard 24270.
31125 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair vehicle or machine cooling system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Tune a diesel engine
Version 1
31214 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to tune a diesel engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Tune a machine petrol engine
Version 1
31266 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to tune a machine petrol engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in manual starting systems
Version 1
31435 Unit Standard 2 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in manual starting systems.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and repair faults in a motorcycle engine
Version 1 This unit standard replaced unit standard 15442 and unit standard 15445.
31437 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to diagnose and repair faults in a motorcycle cylinder head and cylinder and piston assembly.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Disassemble, inspect and reassemble an outdoor power equipment engine
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 2 This unit standard was replaced by skill standard 40481.
31901 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to disassemble, inspect and reassemble an outdoor power equipment engine.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out an automotive engine cylinder head disassembly, inspection and reassembly
Version 1
32319 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to carry out an automotive engine cylinder head disassembly, inspection and reassembly.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of manually operated machines and tools for automotive machining
Version 1
32320 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of manually operated machines and tools for automotive machining.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of a mechanical run-in on an automotive engine
Version 1
32321 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of a mechanical run-in on an automotive engine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive cylinder head reconditioning practices
Version 1
32322 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of automotive cylinder head reconditioning practices.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Determine the cause of engine component failure and reflect on own diagnostic procedures
Version 1
32324 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: determine the cause of engine component failure; and demonstrate knowledge of own learning experience in response to diagnosing engine component failure.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Demonstrate knowledge of automotive engine block reconditioning practices
Version 1
32325 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of automotive engine block reconditioning practices.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Carry out an automotive engine block disassembly, inspection and reassembly
Version 1
32326 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to carry out an automotive engine block disassembly, inspection and reassembly.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Rectify heavy vehicle engine cylinder head faults
Version 4
3392 Unit Standard 4 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: disassemble and inspect a heavy vehicle engine cylinder head; rectify heavy vehicle cylinder head faults; and reassemble a heavy vehicle cylinder head.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Rectify heavy vehicle diesel engine short block faults
Version 4
3393 Unit Standard 8 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: disassemble and inspect a heavy vehicle diesel engine short block; rectify heavy vehicle diesel engine short block faults; and reassemble a heavy vehicle diesel engine short block.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Prepare to lubricate, test, and tune a two-stroke petrol engine
Version 1
40477 Skill Standard 3 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test, tune and repair two-stroke petrol engines
Version 1
40478 Skill Standard 6 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Disassemble, inspect and reassemble an outdoor power engine
Version 1
40481 Skill Standard 10 Credits
View Education Organisations with Consent to Assess »
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Test and tune two-stroke petrol engines and diagnose and repair faults
This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027.
Version 6 This unit standard was replaced by skill standard 40478.
879 Unit Standard 6 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: carry out engine performance tests and tune two-stroke petrol engines; and diagnose and repair two-stroke petrol engine system faults.
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose and rectify vehicle emission control system faults
This standard has expired and is no longer available.
Version 5 This unit standard was replaced by unit standard 31049.
893 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to diagnose and rectify faults in: vacuum and solenoid operated emission control systems; an exhaust emission control system; and an evaporative emission control system, on a vehicle.
Standard-setting body:
Service engine driven stationary and mobile generators and power units, and rectify control system faults
Version 5
980 Unit Standard 3 Credits
View Education Organisations with Consent to Assess »
This unit standard is intended for people in the automotive repair industry. People credited with this unit standard are able to: prepare an engine driven stationary and mobile generator and power unit for operation; and test an engine driven stationary and mobile generator and power unit for correct operation and rectify any control system faults.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Level 5
Demonstrate knowledge of competition race vehicle engine performance modification requirements and practices
This standard has expired and is no longer available.
Version 3
23812 Unit Standard 7 Credits
View Education Organisations with Consent to Assess »
This theory-based unit standard is for people in the automotive industry. People credited with this unit standard are able to demonstrate knowledge of competition race vehicle engine performance modification requirements and practices.
Standard-setting body:
Demonstrate knowledge of engine design factors
Version 1
32323 Unit Standard 15 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to demonstrate knowledge of engine design factors.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose complex heavy vehicle or machine mechanical engine failures and reflect on diagnostic procedures
Version 1
33122 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: diagnose heavy vehicle or machine complex mechanical engine failures; and reflect on learning experience in response to diagnosing complex mechanical engine failures in a heavy vehicle or machine.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Diagnose complex light vehicle mechanical engine failures and reflect on diagnostic procedures
Version 1
33127 Unit Standard 10 Credits
View Education Organisations with Consent to Assess »
People credited with this unit standard are able to: diagnose light vehicle complex mechanical engine failures; and reflect on learning experience in response to diagnosing complex mechanical engine failures in a light vehicle.
Consent & Moderation Requirements:
CMR 14
Standard-setting body:
Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council
Data as at 2025-05-01 23:01:07.45