Domain - Engines
All unit standards registered on the Directory of Assessment Standards may be accessed here.
TOP > Engineering and Technology > Motor Industry > Engines
| 0 Qualifications | 110 Assessment Standards (107 Units & 3 Skills) | View Education Organisations with Consent to Assess |
Qualifications
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Show education organisations, CMR & purpose »
| Level 2 | ||||||
| 15436 | Unit |
Demonstrate knowledge of the construction and operation, and servicing requirements of outboard engines |
4 Credits |
|
||
| 21686 | Unit |
Demonstrate knowledge of automotive cooling systems This standard has expired and is no longer available. |
2 Credits | |||
| 21687 | Unit |
Demonstrate knowledge of basic tuning on a four stroke petrol engine |
3 Credits |
|
||
| 21688 | Unit |
Demonstrate knowledge of disassembling and reassembling a four stroke multi-cylinder engine |
3 Credits |
|
||
| 21691 | Unit |
Disassemble and reassemble a single cylinder or multi-cylinder four-stroke engine under supervision |
2 Credits |
|
||
| 21717 | Unit |
Service automotive cooling systems This standard has expired and is no longer available. |
3 Credits | |||
| 231 | Unit |
Demonstrate knowledge of the operation of two and four stroke petrol and diesel engines This standard has expired and is no longer available. |
4 Credits | |||
| 24276 | Unit |
Demonstrate knowledge of manual starting systems used on small engines |
1 Credits |
|
||
| 243 | Unit |
Carry out basic tuning on a four stroke petrol engine under supervision |
4 Credits |
|
||
| 244 | Unit |
Disassemble and reassemble a four stroke multi-cylinder engine to a running state |
6 Credits |
|
||
| 940 | Unit |
Inspect and rectify governor faults on a small engine |
2 Credits |
|
||
| Level 3 | ||||||
| 15437 | Unit |
Inspect and service outboard engines |
4 Credits |
|
||
| 15439 | Unit |
Demonstrate knowledge of the operation and servicing of open and closed cooling systems on trailer boats |
4 Credits |
|
||
| 15441 | Unit |
Overhaul an engine cooling system water pump This standard has expired and is no longer available. |
3 Credits | |||
| 15445 | Unit |
Diagnose and rectify motorcycle engine piston and cylinder assembly faults This standard has expired and is no longer available. |
5 Credits | |||
| 15446 | Unit |
Remove and fit a light vehicle engine cam belt |
3 Credits |
|
||
| 15447 | Unit |
Install a replacement engine in a trailer boat |
4 Credits |
|
||
| 19636 | Unit |
Remove and install vehicle engine exterior components |
2 Credits |
|
||
| 2334 | Unit |
Remove an engine assembly from, and install the assembly in, a heavy vehicle This standard has expired and is no longer available. |
2 Credits | |||
| 24269 | Unit |
Demonstrate knowledge of cooling system operation, and factors that affect system efficiency on vehicles or machines This standard has expired and is no longer available. |
4 Credits | |||
| 24274 | Unit |
Carry out general repairs to a cylinder head that does not require machining This standard has expired and is no longer available. |
2 Credits | |||
| 24275 | Unit |
Disassemble, inspect, and reassemble an engine short block under general supervision |
3 Credits |
|
||
| 24277 | Unit |
Inspect manual starting system components and rectify component faults on a small engine |
1 Credits |
|
||
| 24285 | Unit |
Demonstrate knowledge of motorcycle engine cooling systems and testing motorcycle engine cooling systems This standard has expired and is no longer available. |
2 Credits | |||
| 24286 | Unit |
Diagnose and rectify faults in a motorcycle engine cooling system This standard has expired and is no longer available. |
3 Credits | |||
| 24287 | Unit |
Demonstrate knowledge of disassembling, inspecting, and reassembling an engine short block |
2 Credits |
|
||
| 24290 | Unit |
Inspect and service auxiliary engines on heavy vehicles or equipment This standard has expired and is no longer available. |
3 Credits | |||
| 24291 | Unit |
Demonstrate knowledge of inspecting and machining engine piston and connecting rod assemblies This standard has expired and is no longer available. |
6 Credits | |||
| 24295 | Unit |
Demonstrate knowledge of small engine air cooling systems and their test and service procedures This standard has expired and is no longer available. |
2 Credits | |||
| 24296 | Unit |
Test and rectify faults in a small engine air cooling system This standard has expired and is no longer available. |
3 Credits | |||
| 24297 | Unit |
Demonstrate knowledge of engine gasket and sealant options This standard has expired and is no longer available. |
2 Credits | |||
| 24300 | Unit |
Check a motorcycle engine for condition and carry out engine tuning requirements |
4 Credits |
|
||
| 24301 | Unit |
Disassemble, inspect, and reassemble a multi-cylinder motorcycle engine This standard has expired and is no longer available. |
4 Credits | |||
| 24302 | Unit |
Demonstrate knowledge of disassembling, inspecting, and reassembling an engine cylinder head |
2 Credits |
|
||
| 24306 | Unit |
Carry out general repairs to an engine short block |
3 Credits |
|
||
| 24807 | Unit |
Remove, disassemble, inspect, reassemble, and refit an engine cylinder head This standard has expired and is no longer available. |
4 Credits | |||
| 30477 | Unit |
Demonstrate knowledge of petrol and diesel engines |
4 Credits |
|
||
| 30479 | Unit |
Service an automotive cooling system |
3 Credits |
|
||
| 30480 | Unit |
Demonstrate knowledge of automotive cooling systems and engine coolant |
2 Credits |
|
||
| 30889 | Unit |
Demonstrate knowledge of replacing automotive timing belts and chains |
2 Credits |
|
||
| 30890 | Unit |
Demonstrate knowledge of equipment used to test engine mechanical condition |
2 Credits |
|
||
| 30891 | Unit |
Describe engine disassembly, inspection and reassembly |
3 Credits |
|
||
| 31221 | Unit |
Describe diesel engine tuning |
6 Credits |
|
||
| 31222 | Unit |
Describe petrol engine tuning |
2 Credits |
|
||
| 31223 | Unit |
Demonstrate knowledge of a diesel engine braking system and an exhaust brake |
4 Credits |
|
||
| 31224 | Unit |
Describe heavy diesel engine cylinder head removal, inspection and refitting |
2 Credits |
|
||
| 31440 | Unit |
Demonstrate knowledge of manual starting systems |
2 Credits |
|
||
| 3400 | Unit |
Check a four stroke petrol engine for condition using hand held test equipment This standard has expired and is no longer available. |
4 Credits | |||
| 929 | Unit |
Test and rectify diesel engine glow plug starting aid system faults |
2 Credits |
|
||
| 943 | Unit |
Remove and install an engine assembly from and to a light vehicle |
2 Credits |
|
||
| Level 4 | ||||||
| 11723 | Unit |
Inspect and machine engine camshafts This standard has expired and is no longer available. |
15 Credits | |||
| 11725 | Unit |
Inspect and machine an engine crankshaft |
25 Credits |
|
||
| 11726 | Unit |
Demonstrate knowledge of engine design factors and machining practices This standard has expired and is no longer available. |
20 Credits | |||
| 11727 | Unit |
Recondition engine cylinder heads |
12 Credits |
|
||
| 11728 | Unit |
Recondition engine cylinder blocks |
10 Credits |
|
||
| 11729 | Unit |
Inspect and machine engine piston and connecting rod assemblies |
6 Credits |
|
||
| 15434 | Unit |
Diagnose and rectify inboard four stroke diesel engine faults on trailer boats This standard has expired and is no longer available. |
10 Credits | |||
| 15435 | Unit |
Diagnose and rectify inboard petrol engine faults on trailer boats |
8 Credits |
|
||
| 15438 | Unit |
Diagnose and rectify outboard engine faults |
4 Credits |
|
||
| 15442 | Unit |
Carry out repairs to a motorcycle cylinder head This standard has expired and is no longer available. |
6 Credits | |||
| 15444 | Unit |
Repair a motorcycle engine crankshaft assembly |
4 Credits |
|
||
| 2313 | Unit |
Rectify fuel injection pump drive faults on diesel engines |
2 Credits |
|
||
| 2335 | Unit |
Repower heavy vehicles or equipment This standard has expired and is no longer available. |
3 Credits | |||
| 2350 | Unit |
Install a repower unit in a light vehicle |
3 Credits |
|
||
| 24270 | Unit |
Diagnose and rectify faults in vehicle or machine engine cooling systems This standard has expired and is no longer available. |
5 Credits | |||
| 24271 | Unit |
Demonstrate knowledge of diagnosing vehicle or machine cooling system faults and their causes |
3 Credits |
|
||
| 24272 | Unit |
Demonstrate knowledge of automotive oscilloscope patterns and conducting a test programme on a four-stroke petrol engine |
1 Credits |
|
||
| 24273 | Unit |
Test a four stroke petrol engine using relevant test equipment and determine engine condition This standard has expired and is no longer available. |
2 Credits | |||
| 24278 | Unit |
Demonstrate knowledge of engine performance testing using a dynamometer |
2 Credits |
|
||
| 24279 | Unit |
Tune and test a four-stroke diesel engine |
6 Credits |
|
||
| 24280 | Unit |
Test engine performance using a dynamometer and determine engine condition |
1 Credits |
|
||
| 24281 | Unit |
Demonstrate knowledge of testing and rectifying diesel engine shutdown system faults |
2 Credits |
|
||
| 24282 | Unit |
Diagnose and rectify diesel engine shutdown system faults |
3 Credits |
|
||
| 24283 | Unit |
Demonstrate knowledge of diesel engine braking systems, exhaust braking systems, and diagnosing and rectifying faults |
2 Credits |
|
||
| 24284 | Unit |
Diagnose and rectify faults in engine braking systems and auxiliary braking systems on a heavy diesel vehicle |
3 Credits |
|
||
| 24288 | Unit |
Demonstrate knowledge of repowering heavy vehicles or equipment This standard has expired and is no longer available. |
1 Credits | |||
| 24289 | Unit |
Diagnose and rectify faults in auxiliary engines on heavy vehicles or equipment This standard has expired and is no longer available. |
5 Credits | |||
| 24292 | Unit |
Demonstrate knowledge of motorcycle engine cylinder head faults, and their inspection and repair requirements This standard has expired and is no longer available. |
3 Credits | |||
| 24293 | Unit |
Demonstrate knowledge of motorcycle engine crankshaft assembly faults and their inspection and repair requirements This standard has expired and is no longer available. |
1 Credits | |||
| 24294 | Unit |
Demonstrate knowledge of two-stroke petrol engine lubrication, testing and tuning This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027. |
3 Credits |
|
||
| 24298 | Unit |
Align bore and hone bearing tunnels This standard has expired and is no longer available. |
3 Credits | |||
| 24299 | Unit |
Demonstrate knowledge of engine crankshaft and camshaft machining procedures This standard has expired and is no longer available. |
4 Credits | |||
| 30886 | Unit |
Diagnose the mechanical condition of an engine |
4 Credits |
|
||
| 30887 | Unit |
Replace an automotive timing belt or chain |
4 Credits |
|
||
| 30888 | Unit |
Remove, inspect and refit a cylinder head |
4 Credits |
|
||
| 31125 | Unit |
Diagnose and repair vehicle or machine cooling system faults |
6 Credits |
|
||
| 31214 | Unit |
Tune a diesel engine |
8 Credits |
|
||
| 31266 | Unit |
Tune a machine petrol engine |
3 Credits |
|
||
| 31435 | Unit |
Diagnose and repair faults in manual starting systems |
2 Credits |
|
||
| 31437 | Unit |
Diagnose and repair faults in a motorcycle engine |
8 Credits |
|
||
| 31901 | Unit |
Disassemble, inspect and reassemble an outdoor power equipment engine This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027. |
10 Credits |
|
||
| 32319 | Unit |
Carry out an automotive engine cylinder head disassembly, inspection and reassembly |
10 Credits |
|
||
| 32320 | Unit |
Demonstrate knowledge of manually operated machines and tools for automotive machining |
6 Credits |
|
||
| 32321 | Unit |
Demonstrate knowledge of a mechanical run-in on an automotive engine |
3 Credits |
|
||
| 32322 | Unit |
Demonstrate knowledge of automotive cylinder head reconditioning practices |
10 Credits |
|
||
| 32324 | Unit |
Determine the cause of engine component failure and reflect on own diagnostic procedures |
10 Credits |
|
||
| 32325 | Unit |
Demonstrate knowledge of automotive engine block reconditioning practices |
10 Credits |
|
||
| 32326 | Unit |
Carry out an automotive engine block disassembly, inspection and reassembly |
10 Credits |
|
||
| 3392 | Unit |
Rectify heavy vehicle engine cylinder head faults |
4 Credits |
|
||
| 3393 | Unit |
Rectify heavy vehicle diesel engine short block faults |
8 Credits |
|
||
| 40477 | Skill |
Prepare to lubricate, test, and tune a two-stroke petrol engine |
3 Credits |
|
||
| 40478 | Skill |
Test, tune and repair two-stroke petrol engines |
6 Credits |
|
||
| 40481 | Skill |
Disassemble, inspect and reassemble an outdoor power engine |
10 Credits |
|
||
| 879 | Unit |
Test and tune two-stroke petrol engines and diagnose and repair faults This standard is expiring. The last date for assessment to take place is Fri Dec 31 00:00:00 NZDT 2027. |
6 Credits |
|
||
| 893 | Unit |
Diagnose and rectify vehicle emission control system faults This standard has expired and is no longer available. |
3 Credits | |||
| 980 | Unit |
Service engine driven stationary and mobile generators and power units, and rectify control system faults |
3 Credits |
|
||
| Level 5 | ||||||
| 23812 | Unit |
Demonstrate knowledge of competition race vehicle engine performance modification requirements and practices This standard has expired and is no longer available. |
7 Credits | |||
| 32323 | Unit |
Demonstrate knowledge of engine design factors |
15 Credits |
|
||
| 33122 | Unit |
Diagnose complex heavy vehicle or machine mechanical engine failures and reflect on diagnostic procedures |
10 Credits |
|
||
| 33127 | Unit |
Diagnose complex light vehicle mechanical engine failures and reflect on diagnostic procedures |
10 Credits |
|
||