Domain - Boatbuilding
All unit standards registered on the Directory of Assessment Standards may be accessed here.
TOP > Manufacturing > Boating Industries > Boatbuilding
| 0 Qualifications | 207 Assessment Standards (207 Units) | View Education Organisations with Consent to Assess |
Qualifications
No qualifications currently registered at this level. Also check fields and sub-fields.
Assessment Standards
Show education organisations, CMR & purpose »
| Level 2 | ||||||
| 10836 | Unit |
Produce scale drawings of boat surfaces from corrected offsets |
6 Credits |
|
||
| 18158 | Unit |
Select, use, and care for hand tools used in the marine or composite industry |
5 Credits |
|
||
| 18160 | Unit |
Operate mechanical plant used in boatbuilding This standard has expired and is no longer available. |
12 Credits | |||
| 18161 | Unit |
Perform measurements and calculations used in a marine or composite workplace |
5 Credits |
|
||
| 18166 | Unit |
Participate in a project team in a marine or composite workplace |
5 Credits |
|
||
| 18168 | Unit |
Demonstrate knowledge of timber and adhesives used in boatbuilding This standard has expired and is no longer available. |
4 Credits | |||
| 25343 | Unit |
Describe boat fittings and fastenings |
4 Credits |
|
||
| 25344 | Unit |
Demonstrate knowledge of marine or composite workplaces |
3 Credits |
|
||
| 25345 | Unit |
Demonstrate knowledge of terminology used in the marine industry This standard has expired and is no longer available. |
6 Credits | |||
| 30772 | Unit |
Demonstrate knowledge of a marine diesel fuel system |
2 Credits |
|
||
| 30781 | Unit |
Demonstrate knowledge of marine engine operation |
4 Credits |
|
||
| 9917 | Unit |
Demonstrate knowledge of boatbuilding methods |
4 Credits |
|
||
| 9944 | Unit |
Describe the properties and uses of aluminium alloys in boatbuilding |
4 Credits |
|
||
| 9949 | Unit |
Describe the properties and uses of steel in boatbuilding |
4 Credits |
|
||
| Level 3 | ||||||
| 10837 | Unit |
Prepare a lofting floor for boatbuilding This standard has expired and is no longer available. |
4 Credits | |||
| 10838 | Unit |
Draw full sized hulls from corrected offsets under supervision This standard has expired and is no longer available. |
4 Credits | |||
| 10839 | Unit |
Draw full sized decks and superstructures from corrected offsets under supervision This standard has expired and is no longer available. |
6 Credits | |||
| 10843 | Unit |
Mark out full sized boat components from loftings and computer-generated mylars This standard has expired and is no longer available. |
2 Credits | |||
| 11777 | Unit |
Install production inboard engine packages in boats This standard has expired and is no longer available. |
6 Credits | |||
| 11794 | Unit |
Install marine electrical and electronic systems and equipment |
20 Credits |
|
||
| 12942 | Unit |
Build boat framework under supervision |
15 Credits |
|
||
| 18159 | Unit |
Select, use, and care for portable power tools used in the marine or composite industry |
5 Credits |
|
||
| 18162 | Unit |
Calculate quantities and costs for marine or composite projects |
5 Credits |
|
||
| 18163 | Unit |
Demonstrate knowledge of marine or composite construction drawings and produce a related freehand sketch |
2 Credits |
|
||
| 18164 | Unit |
Demonstrate knowledge of insulation and install insulation in boats or components |
2 Credits |
|
||
| 18165 | Unit |
Demonstrate knowledge of computer technology used in the marine or composite industry |
6 Credits |
|
||
| 18169 | Unit |
Laminate and join timber in the marine industry |
4 Credits |
|
||
| 18170 | Unit |
Contribute to a project team in a marine or composite workplace |
5 Credits |
|
||
| 18171 | Unit |
Demonstrate knowledge of spars and rigging |
4 Credits |
|
||
| 23035 | Unit |
Describe and install boat tankage systems |
6 Credits |
|
||
| 23037 | Unit |
Demonstrate knowledge of traditional wooden boatbuilding This standard has expired and is no longer available. |
10 Credits | |||
| 23039 | Unit |
Demonstrate knowledge of the transportation of spars and rigging |
4 Credits |
|
||
| 23041 | Unit |
Demonstrate knowledge of abrasives and resources used in marine or composite painting |
5 Credits |
|
||
| 23042 | Unit |
Demonstrate knowledge of substrate preparation for marine painting |
5 Credits |
|
||
| 23043 | Unit |
Form coves, radiuses and detail on boats using filler |
5 Credits |
|
||
| 23044 | Unit |
Demonstrate knowledge of marine paint systems |
5 Credits |
|
||
| 23046 | Unit |
Demonstrate knowledge of marine or composite paint system application |
4 Credits |
|
||
| 23047 | Unit |
Demonstrate knowledge of marine clear finish systems and application |
8 Credits |
|
||
| 23244 | Unit |
Apply health and safety procedures in a marine or composite workplace |
5 Credits |
|
||
| 23245 | Unit |
Install deck hatches, windscreens, and screen rails on production trailer boats |
6 Credits |
|
||
| 23246 | Unit |
Fix lining and floor coverings on production trailer boats |
5 Credits |
|
||
| 23247 | Unit |
Describe upholstery applications on production trailer boats This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025. |
3 Credits |
|
||
| 23248 | Unit |
Detail a production trailer boat |
3 Credits |
|
||
| 23250 | Unit |
Demonstrate knowledge of production trailer boat support and transport requirements |
5 Credits |
|
||
| 23251 | Unit |
Demonstrate knowledge of production processes used in trailer boat building This standard has expired and is no longer available. |
8 Credits | |||
| 25113 | Unit |
Describe filling and fairing technology used in boatbuilding This standard has expired and is no longer available. |
4 Credits | |||
| 25114 | Unit |
Mask and protect marine or composite surfaces for painting |
5 Credits |
|
||
| 25115 | Unit |
Describe, install and test plumbing systems in boats This standard has expired and is no longer available. |
6 Credits | |||
| 25117 | Unit |
Demonstrate knowledge of timber used in boatbuilding |
4 Credits |
|
||
| 25118 | Unit |
Demonstrate knowledge of adhesives used in a marine or composites workplace |
5 Credits |
|
||
| 25155 | Unit |
Fair boat surfaces This standard has expired and is no longer available. |
4 Credits | |||
| 25156 | Unit |
Fill boat surfaces This standard has expired and is no longer available. |
6 Credits | |||
| 25157 | Unit |
Build metal boat framework |
20 Credits |
|
||
| 25998 | Unit |
Demonstrate knowledge of marine paint system repair |
6 Credits |
|
||
| 27322 | Unit |
Demonstrate knowledge of marine electronic equipment types, functions and connection |
6 Credits |
|
||
| 27325 | Unit |
Explain NMEA standards and proprietary on-board data communication systems |
4 Credits |
|
||
| 27326 | Unit |
Explain AC system earthing and DC system grounding, and isolation safety requirements on vessels |
3 Credits |
|
||
| 29235 | Unit |
Describe and apply filling and fairing technology |
15 Credits |
|
||
| 29237 | Unit |
Operate simple mechanical plant or equipment used in the marine or composite industry |
5 Credits |
|
||
| 30770 | Unit |
Dismantle, inspect, assemble and test simple marine system components |
10 Credits |
|
||
| 30771 | Unit |
Demonstrate knowledge of forced air intake systems on a marine engine |
4 Credits |
|
||
| 30775 | Unit |
Manually produce and interpret marine system engineering sketches |
5 Credits |
|
||
| 30777 | Unit |
Produce marine components by performing engineering drilling operations |
5 Credits |
|
||
| 31196 | Unit |
Demonstrate knowledge of maintenance and repair methods of wooden boats |
5 Credits |
|
||
| 31200 | Unit |
Demonstrate basic knowledge of a carburettor system in a marine engine |
3 Credits |
|
||
| 31202 | Unit |
Demonstrate knowledge of petrol and an electronic fuel injection (EFI) system for a marine engine |
4 Credits |
|
||
| 31433 | Unit |
Mix and apply stain to marine surfaces |
5 Credits |
|
||
| 31771 | Unit |
Explain exotic veneers used in marine interiors |
2 Credits |
|
||
| 9913 | Unit |
Demonstrate knowledge of the New Zealand marine and composite industry |
5 Credits |
|
||
| 9922 | Unit |
Produce templates or patterns used in the marine industry |
4 Credits |
|
||
| 9945 | Unit |
Assemble metal components for joining in production boatbuilding under supervision This standard has expired and is no longer available. |
8 Credits | |||
| 9950 | Unit |
Fill and fair boat surfaces This standard has expired and is no longer available. |
6 Credits | |||
| Level 4 | ||||||
| 10840 | Unit |
Draw full sized hulls, decks, and superstructures from corrected offsets This standard has expired and is no longer available. |
3 Credits | |||
| 10841 | Unit |
Produce a half-model to scale |
8 Credits |
|
||
| 11778 | Unit |
Install and test custom power plants and power trains |
20 Credits |
|
||
| 11780 | Unit |
Determine repair requirements for inboard power plants and power trains This standard has expired and is no longer available. |
6 Credits | |||
| 11781 | Unit |
Preserve and evaluate a previously-submerged power plant |
3 Credits |
|
||
| 11782 | Unit |
Maintain and repair marine engine systems |
20 Credits |
|
||
| 11783 | Unit |
Maintain, repair and recondition inboard engine systems This standard has expired and is no longer available. |
40 Credits | |||
| 11786 | Unit |
Anti-foul a boat |
2 Credits |
|
||
| 11787 | Unit |
Evaluate, clean, and prepare wooden substrates for marine surface coatings |
5 Credits |
|
||
| 11788 | Unit |
Evaluate, clean, and prepare fibre-reinforced composite substrates for surface coatings |
5 Credits |
|
||
| 11789 | Unit |
Evaluate, clean, and prepare steel substrates for marine surface coatings |
5 Credits |
|
||
| 11790 | Unit |
Evaluate, clean, and prepare aluminium substrates for marine surface coatings |
5 Credits |
|
||
| 11791 | Unit |
Prepare for, and apply build coats and finish coats for marine exterior paint surfaces |
20 Credits |
|
||
| 11792 | Unit |
Apply clear marine surface coats This standard has expired and is no longer available. |
10 Credits | |||
| 11793 | Unit |
Mark and prepare fair lines for the application of marine graphics This standard has expired and is no longer available. |
6 Credits | |||
| 11795 | Unit |
Commission marine electrical and electronic systems and equipment |
10 Credits |
|
||
| 23038 | Unit |
Form and shape compound aluminium plate for boats |
10 Credits |
|
||
| 23040 | Unit |
Demonstrate knowledge of yacht spar and rigging systems |
6 Credits |
|
||
| 23045 | Unit |
Perform calculations for marine paint systems |
5 Credits |
|
||
| 23048 | Unit |
Explain defects in marine paint finishes |
4 Credits |
|
||
| 23049 | Unit |
Demonstrate knowledge of composite technology for a marine or composite industry |
5 Credits |
|
||
| 23241 | Unit |
Loft a boat hull |
10 Credits |
|
||
| 23242 | Unit |
Loft full sized decks and superstructures |
6 Credits |
|
||
| 23243 | Unit |
Explain the causes and prevention of material deterioration in the marine environment |
10 Credits |
|
||
| 23249 | Unit |
Install electrical systems in a production trailer boat |
5 Credits |
|
||
| 23252 | Unit |
Demonstrate knowledge of production trailer boat design |
5 Credits |
|
||
| 23253 | Unit |
Join a composite production trailer boat hull and deck |
8 Credits |
|
||
| 23255 | Unit |
Install an outboard motor on a production trailer boat |
8 Credits |
|
||
| 23256 | Unit |
Demonstrate knowledge of quality control for trailer boat production |
5 Credits |
|
||
| 23257 | Unit |
Demonstrate knowledge of, and install a production trailer boat fuel system |
5 Credits |
|
||
| 25119 | Unit |
Describe and safely control work aloft on yacht rigs |
4 Credits |
|
||
| 25120 | Unit |
Demonstrate knowledge of the design and specification of yacht spars and rigging |
4 Credits |
|
||
| 25121 | Unit |
Maintain yacht spars, rigging and hardware |
4 Credits |
|
||
| 25122 | Unit |
Install and remove yacht spars and rigging |
8 Credits |
|
||
| 25123 | Unit |
Interpret, select, and assemble components of yacht spars and rigging |
6 Credits |
|
||
| 25151 | Unit |
Fabricate yacht rigging |
10 Credits |
|
||
| 25152 | Unit |
Apply 2D CAD/CAM in boatbuilding |
5 Credits |
|
||
| 25153 | Unit |
Explain computerised manufacturing processes used in the marine or composite industry |
3 Credits |
|
||
| 25154 | Unit |
Prepare for and apply a marine interior coating system |
15 Credits |
|
||
| 25999 | Unit |
Repair marine paint systems This standard has expired and is no longer available. |
8 Credits | |||
| 26082 | Unit |
Demonstrate knowledge of and apply sustainability concepts in the boatbuilding industry This standard has expired and is no longer available. |
10 Credits | |||
| 26090 | Unit |
Demonstrate knowledge of trim and stability variation on vessels This standard has expired and is no longer available. |
5 Credits | |||
| 26091 | Unit |
Assess marine paint preparation and finishes |
5 Credits |
|
||
| 27319 | Unit |
Demonstrate knowledge of marine electrical power supply, monitoring and charging systems |
15 Credits |
|
||
| 27320 | Unit |
Demonstrate knowledge of documentation and compliance requirements for marine electrical systems |
5 Credits |
|
||
| 27321 | Unit |
Demonstrate knowledge of marine electrical digital switching systems |
4 Credits |
|
||
| 27323 | Unit |
Demonstrate knowledge of marine genset electrical installation, maintenance and troubleshooting |
4 Credits |
|
||
| 27324 | Unit |
Explain and interpret electronic system schematic and connection drawings on vessels |
3 Credits |
|
||
| 29236 | Unit |
Operate mechanical plant used in a marine or composite workplace |
10 Credits |
|
||
| 29238 | Unit |
Demonstrate and apply knowledge of sustainability practices in a marine or composite industry |
5 Credits |
|
||
| 29546 | Unit |
Collaborate within a project team in the marine or composite industry |
5 Credits |
|
||
| 30203 | Unit |
Cut metal by thermal processes in the marine industry |
5 Credits |
|
||
| 30204 | Unit |
Demonstrate knowledge of marine electrical systems |
8 Credits |
|
||
| 30206 | Unit |
Fabricate boat components |
20 Credits |
|
||
| 30207 | Unit |
Form and shape light fabrication materials for boat components |
20 Credits |
|
||
| 30208 | Unit |
Lay out and mark off light fabrication boat components |
25 Credits |
|
||
| 30209 | Unit |
Weld aluminium boat components |
15 Credits |
|
||
| 30769 | Unit |
Dismantle, inspect, assemble and test complex marine system components |
20 Credits |
|
||
| 30773 | Unit |
Inspect and test air intake and exhaust systems of a marine diesel engine |
5 Credits |
|
||
| 30774 | Unit |
Interpret installation plan and marine engineering drawings |
5 Credits |
|
||
| 30776 | Unit |
Perform servicing tasks on a marine diesel fuel system |
2 Credits |
|
||
| 30778 | Unit |
Produce marine components by performing engineering turning operations |
12 Credits |
|
||
| 30779 | Unit |
Weld metal boat components in all positions |
10 Credits |
|
||
| 30780 | Unit |
Weld metal boat components in common pipe welding positions |
15 Credits |
|
||
| 31203 | Unit |
Diagnose, repair, and test marine engine electrical wiring faults |
5 Credits |
|
||
| 31207 | Unit |
Dismantle, check, and rectify cylinder head of a marine engine |
4 Credits |
|
||
| 31212 | Unit |
Test and rectify faults in marine engine charging and starting systems |
5 Credits |
|
||
| 31213 | Unit |
Test, diagnose and rectify marine electronic fuel injection (EFI) system |
6 Credits |
|
||
| 31431 | Unit |
Apply knowledge of marine paint system repair |
10 Credits |
|
||
| 31432 | Unit |
Demonstrate knowledge of and create a controlled environment for coating in boatbuilding projects |
10 Credits |
|
||
| 31434 | Unit |
Apply paint by spray methods for a marine surface |
10 Credits |
|
||
| 31772 | Unit |
Overlay interior linings for marine interiors |
5 Credits |
|
||
| 31930 | Unit |
Explain, install, and test fuel systems in boats |
10 Credits |
|
||
| 31936 | Unit |
Handcraft and fix trim mouldings for marine interiors |
5 Credits |
|
||
| 9923 | Unit |
Install internal and external boat hardware fittings |
4 Credits |
|
||
| 9927 | Unit |
Carry out the repair, restoration, and structural alteration of wooden boats This standard has expired and is no longer available. |
20 Credits | |||
| 9930 | Unit |
Plank a boat framework |
20 Credits |
|
||
| 9931 | Unit |
Overlay boat decks with teak This standard has expired and is no longer available. |
15 Credits | |||
| 9932 | Unit |
Install interior boat cabinetry |
10 Credits |
|
||
| 9933 | Unit |
Install exterior boat joinery, hatches, and components |
10 Credits |
|
||
| 9934 | Unit |
Construct interior support structures for boats |
15 Credits |
|
||
| 9935 | Unit |
Construct interior boat cabinetry in timber |
20 Credits |
|
||
| 9936 | Unit |
Construct exterior boat joinery in timber |
20 Credits |
|
||
| 9937 | Unit |
Install interior and exterior boat systems |
10 Credits |
|
||
| 9938 | Unit |
Explain and install pipework in boats |
15 Credits |
|
||
| 9939 | Unit |
Build boat frameworks in timber This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025. |
20 Credits |
|
||
| 9940 | Unit |
Plank and glass sheathe a mould or boat |
15 Credits |
|
||
| 9941 | Unit |
Carry out the repair, restoration, and structural alteration of fibre-reinforced composite boats This standard has expired and is no longer available. |
20 Credits | |||
| 9942 | Unit |
Construct internal and external boat joinery in fibre-reinforced composites (FRC) This standard has expired and is no longer available. |
15 Credits | |||
| 9943 | Unit |
Carry out the repair, restoration, and structural alteration of aluminium boats This standard has expired and is no longer available. |
20 Credits | |||
| 9946 | Unit |
Join complex metal boat components |
10 Credits |
|
||
| 9948 | Unit |
Carry out the repair, restoration, and structural alteration of steel boats This standard has expired and is no longer available. |
20 Credits | |||
| 9951 | Unit |
Manufacture, assemble, and maintain spars and rigging This standard has expired and is no longer available. |
20 Credits | |||
| Level 5 | ||||||
| 10842 | Unit |
Produce fair lines for boatbuilding from uncorrected offsets This standard has expired and is no longer available. |
10 Credits | |||
| 11776 | Unit |
Manage maintenance, repair, and reconditioning contracts for inboard power plants and trains This standard has expired and is no longer available. |
4 Credits | |||
| 11779 | Unit |
Plan the installation of inboard power plants and power trains |
20 Credits |
|
||
| 11785 | Unit |
Specify marine surface coating systems to meet customer's requirements This standard has expired and is no longer available. |
50 Credits | |||
| 11796 | Unit |
Maintain and repair marine electronic systems and equipment This standard has expired and is no longer available. |
20 Credits | |||
| 11797 | Unit |
Maintain and repair marine electrical systems and equipment This standard has expired and is no longer available. |
20 Credits | |||
| 26083 | Unit |
Analyse requirements, and supervise and lead the laying out, marking and cutting of vessel construction materials This standard has expired and is no longer available. |
10 Credits | |||
| 26084 | Unit |
Plan and communicate a work schedule and supervise and lead a project team for construction of a boat module |
10 Credits |
|
||
| 26085 | Unit |
Supervise the use and care of portable power tools in boatbuilding This standard has expired and is no longer available. |
5 Credits | |||
| 26086 | Unit |
Verify machine operation, train users and supervise machine operation in boatbuilding This standard has expired and is no longer available. |
10 Credits | |||
| 26087 | Unit |
Explain costing and estimate pricing for a complex boatbuilding project |
10 Credits |
|
||
| 26088 | Unit |
Explain regulatory compliance in boatbuilding |
5 Credits |
|
||
| 26092 | Unit |
Explain cathodic protection for marine vessels |
6 Credits |
|
||
| 26094 | Unit |
Determine scantlings for a wooden boat This standard has expired and is no longer available. |
10 Credits | |||
| 26095 | Unit |
Test properties of boatbuilding timber This standard has expired and is no longer available. |
10 Credits | |||
| 26097 | Unit |
Shutdown and isolate hydraulic equipment on a vessel being constructed or maintained This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025. |
3 Credits |
|
||
| 26098 | Unit |
Supervise and survey hull welding to classification society requirements This standard has expired and is no longer available. |
6 Credits | |||
| 26100 | Unit |
Determine requirements and supervise the dismantling, inspection, assembly and testing of boat components This standard has expired and is no longer available. |
5 Credits | |||
| 26101 | Unit |
Interpret installation requirements and plan a complex plumbing system installation for a vessel |
10 Credits |
|
||
| 26102 | Unit |
Interpret installation requirements and plan a tankage system installation for a vessel |
6 Credits |
|
||
| 26103 | Unit |
Interpret installation requirements and plan a hydraulic system installation for a vessel |
8 Credits |
|
||
| 26104 | Unit |
Interpret installation requirements and plan a refrigeration system installation for a vessel This standard has expired and is no longer available. |
6 Credits | |||
| 26105 | Unit |
Determine requirements and plan an air conditioning system installation for a vessel This standard has expired and is no longer available. |
6 Credits | |||
| 26106 | Unit |
Interpret installation requirements and plan a custom power plant and power train installation on a vessel This standard has expired and is no longer available. |
6 Credits | |||
| 26107 | Unit |
Apply 3D CAD/CAM in boatbuilding |
5 Credits |
|
||
| 26108 | Unit |
Explain the prevention of fouling and corrosion in saltwater pipework on vessels This standard has expired and is no longer available. |
4 Credits | |||
| 30202 | Unit |
Implement communication strategies for a complex project in the marine or composite industry |
20 Credits |
|
||
| 9926 | Unit |
Supervise the construction, repair, restoration, and structural alteration of boats This standard has expired and is no longer available. |
25 Credits | |||
| 9952 | Unit |
Install masts, spars, and make and fit rigging This standard has expired and is no longer available. |
20 Credits | |||
| Level 6 | ||||||
| 11784 | Unit |
Select marine power plant and power train components This standard has expired and is no longer available. |
15 Credits | |||
| 26089 | Unit |
Explain and plan project scope and control processes in a marine or composite project |
12 Credits |
|
||
| 26093 | Unit |
Produce a work schedule and resourcing plan for a composite boat structure |
7 Credits |
|
||
| 26096 | Unit |
Produce a work schedule and resourcing plan for a wooden boat structure This standard has expired and is no longer available. |
7 Credits | |||
| 26099 | Unit |
Produce a work schedule and resourcing plan for a metal boat structure This standard has expired and is no longer available. |
7 Credits | |||
| 30205 | Unit |
Develop and manage a risk management plan for a complex project in the marine or composite industry |
20 Credits |
|
||
| 9924 | Unit |
Manage a marine construction contract |
40 Credits |
|
||
| 9925 | Unit |
Manage contracts for the repair, restoration, and structural alteration of boats This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025. |
20 Credits |
|
||
| 9928 | Unit |
Commission a single boat system |
4 Credits |
|
||
| Level 7 | ||||||
| 11798 | Unit |
Design marine electronic systems This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025. |
20 Credits |
|
||
| 11799 | Unit |
Design marine electrical control and monitoring systems |
20 Credits |
|
||
| 9929 | Unit |
Commission a boat This standard is expiring. The last date for assessment to take place is Wed Dec 31 00:00:00 NZDT 2025. |
12 Credits |
|
||
| 9947 | Unit |
Determine method of construction for metal boatbuilding This standard has expired and is no longer available. |
15 Credits | |||