Domain - Boatbuilding

Domain - Boatbuilding

Search Standards

All unit standards registered on the Directory of Assessment Standards may be accessed here. 

TOP > Manufacturing > Boating Industries > Boatbuilding

Qualifications Domain-full

No qualifications currently registered at this level. Also check fields and sub-fields.

Assessment Standards

Hide education organisations, CMR & purpose  »

Level 2

Produce scale drawings of boat surfaces from corrected offsets

Word  PDF

Version 5

10836 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for, and draw to scale boats surfaces in orthographic projection; and create scale drawings of boats in orthographic projection.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Select, use, and care for hand tools used in the marine or composite industry

Word  PDF

Version 5

18158 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: select and use hand tools to complete tasks; and care for hand tools in the marine or composite industry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Operate mechanical plant used in boatbuilding
This standard has expired and is no longer available.

Version 4 This unit standard has been replaced by unit standard 29237 and unit standard 29236.

18160 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare to operate, and operate mechanical plant used in boatbuilding.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Perform measurements and calculations used in a marine or composite workplace

Word  PDF

Version 5

18161 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: select measuring devices to suit task requirements; and complete measurement tasks, and perform calculations in a marine or composite workplace.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Participate in a project team in a marine or composite workplace

Word  PDF

Version 5

18166 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain team member roles and interactions, and actively participate in project activities, and reflect on a team performance for a marine or composite project.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of timber and adhesives used in boatbuilding
This standard has expired and is no longer available.

Version 3 This unit standard has been replaced by unit standard 25117 and unit standard 25118.

18168 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify timbers for use in boatbuilding; select timbers for use in boatbuilding; and identify adhesives used in wooden boatbuilding.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Describe boat fittings and fastenings

Word  PDF

Version 2

25343 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe boat fittings and fastenings.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine or composite workplaces

Word  PDF

Version 3

25344 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is an introductory unit standard for people planning to work in the marine industry. People credited with this unit standard will be able to demonstrate knowledge of: the scope of work, materials and sequencing; maintenance or warranty requirements for finished items; and industry expectations of employees in a marine or composite workplace.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of terminology used in the marine industry
This standard has expired and is no longer available.

Version 3

25345 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is an introductory unit standard for people working or planning to work in the marine industry. People credited with this unit standard will be able to demonstrate knowledge of terminology associated with: the deck of a vessel; hull shape; vessel movement; appendages of a vessel; construction of a vessel; rig; interior of a vessel; moving, transportation and storing boats; painting a vessel; deterioration on a vessel; plumbing and engineering on a vessel; and the safety of life at sea.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of a marine diesel fuel system

Word  PDF

Version 1

30772 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of diesel fuel, and a marine diesel fuel system.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine engine operation

Word  PDF

Version 1

30781 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe the operation sequence of marine engines and explain marine engine timing operation and firing order.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe the properties and uses of aluminium alloys in boatbuilding

Word  PDF

Version 6

9944 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe the properties and uses of aluminium alloys in boatbuilding.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe the properties and uses of steel in boatbuilding

Word  PDF

Version 6

9949 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe the properties and uses of steel in boatbuilding.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Level 3

Prepare a lofting floor for boatbuilding
This standard has expired and is no longer available.

Version 4 This unit standard, unit standard 10838, and unit standard 10842 have been replaced by unit standard 23241.

10837 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare for laying out a lofting grid, and lay out and check grid.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Draw full sized hulls from corrected offsets under supervision
This standard has expired and is no longer available.

Version 4 This unit standard, unit standard 10837, and unit standard 10842 have been replaced by unit standard 23241.

10838 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare for drawing full sized hulls, and produce full sized drawings of hulls.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Draw full sized decks and superstructures from corrected offsets under supervision
This standard has expired and is no longer available.

Version 4 This unit standard and unit standard 10840 have been replaced by unit standard 23242.

10839 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare for drawing full sized decks and superstructures, and produce full sized drawings of decks and superstructures.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Mark out full sized boat components from loftings and computer-generated mylars
This standard has expired and is no longer available.

Version 6

10843 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare for marking out full sized boat components, and mark out full sized boat components.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install production inboard engine packages in boats
This standard has expired and is no longer available.

Version 7

11777 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for installation of production inboard engine packages in boats, install and align power plants and power trains; and complete the installation process.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install marine electrical and electronic systems and equipment

Word  PDF

Version 6

11794 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: establish installation requirements; run cabling; connect and mount the systems and equipment to the boat''s structure; and check and static test the installation for marine electrical and electronic systems and equipment.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Build boat framework under supervision

Word  PDF

Version 6

12942 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: manufacture boat frame members; install frame members; and fair the installed framework, under supervision.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Select, use, and care for portable power tools used in the marine or composite industry

Word  PDF

Version 5

18159 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to select, use, and care for portable power tools used in the marine or composite industry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Calculate quantities and costs for marine or composite projects

Word  PDF

Version 5

18162 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to estimate and calculate quantities, labour costs, and costs of materials used for marine or composite projects.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine or composite construction drawings and produce a related freehand sketch

Word  PDF

Version 5

18163 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of marine or composite construction drawings, and produce a freehand sketch of items or item components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of insulation and install insulation in boats or components

Word  PDF

Version 5

18164 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of insulation types and materials used in boats or components; and select and install insulation in boats or components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of computer technology used in the marine or composite industry

Word  PDF

Version 5

18165 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to, as used in the marine or composite industry: explain computer business applications; describe computer design applications; describe a computer aided manufacturing process; and explain on-board computer systems used.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Laminate and join timber in the marine industry

Word  PDF

Version 4

18169 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to laminate timber and join timber in the marine industry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Contribute to a project team in a marine or composite workplace

Word  PDF

Version 5

18170 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to contribute to a project team and describe project improvements in a marine or composite workplace.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of spars and rigging

Word  PDF

Version 4

18171 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe spars and rigging; explain the principles and dynamics of spars and rigging; explain the materials used for spars and rigging; and explain maintenance procedures of spars and rigging.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe and install boat tankage systems

Word  PDF

Version 3

23035 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe boat tank types according to the fluid stored and construction materials; describe boat tank components, penetrations, and connections; and install tanks in boats.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of traditional wooden boatbuilding
This standard has expired and is no longer available.

Version 2 This unit standard was replaced by unit standard 31196.

23037 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe the design evolution and development of New Zealand boats; identify materials, tools and processes used in traditional wooden boatbuilding; describe framing types and components, planking types and methods, and fastenings; identify sealing and waterproofing products and methods; describe maintenance for traditional boats, and typical repairs in traditional wooden boatbuilding.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Demonstrate knowledge of the transportation of spars and rigging

Word  PDF

Version 2

23039 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: explain packing requirements for spars and rigging; describe freight methods for spars; describe export requirements for spars and rigging; and describe domestic transport and freight requirements.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of abrasives and resources used in marine or composite painting

Word  PDF

Version 3

23041 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to, for marine or composite painting: explain the use of abrasive paper; and select abrasive paper and sanding equipment.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of substrate preparation for marine painting

Word  PDF

Version 3

23042 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe substrate characteristics for marine painting applications; describe factors affecting the repainting of existing painted surfaces; explain surface preparation factors; and explain methods of surface preparation.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Form coves, radiuses and detail on boats using filler

Word  PDF

Version 3

23043 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to form: coves on boats using filler; radiuses on boat corners; and details on boats using filler.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine paint systems

Word  PDF

Version 2

23044 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard will be able to: describe marine paint systems and components; describe marine finish types; and explain common resin technologies used in marine paint systems.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine or composite paint system application

Word  PDF

Version 3

23046 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe paint specifications; interpret paint system data sheets; describe paint system application records; explain paint system measuring methods; describe paint system pre-application processes; describe application methods and ventilation requirements for application of marine or composite paint.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine clear finish systems and application

Word  PDF

Version 3

23047 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe marine clear finish systems; describe marine clear finish system preparation; describe mixing and application methods for marine clear finish systems; and explain marine clear finish remedial actions required for issues.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Apply health and safety procedures in a marine or composite workplace

Word  PDF

Version 3

23244 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: explain the purpose of health and safety planning and compliance, hazards, and accident and emergency procedures; and apply controls for the marine or composite workplace. This unit standard introduces learners to workplace health and safety legislation and enables them to work safely, ensuring the health and safety of themselves and others.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install deck hatches, windscreens, and screen rails on production trailer boats

Word  PDF

Version 2

23245 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare materials and equipment and install deck hatches, windscreen, and screen rail on production trailer boats.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Fix lining and floor coverings on production trailer boats

Word  PDF

Version 2

23246 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare materials and equipment, and fix lining and floor coverings on production trailer boats.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe upholstery applications on production trailer boats
This standard is expiring. The last date for assessment to take place is 31 December 2025.

Word  PDF

Version 3

23247 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe: upholstery applications on production trailer boats; templates for trailer boat squab applications; fastenings and fixings of upholstery; and to identify and describe remedies for non-fitting upholstery parts.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Detail a production trailer boat

Word  PDF

Version 2

23248 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are, for production trailer boats, able to: groom and apply signs and graphics; and identify and repair minor defects and imperfections.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of production trailer boat support and transport requirements

Word  PDF

Version 2

23250 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain transport securing methods, maintenance requirements, and transport requirements for production trailer boats.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of production processes used in trailer boat building
This standard has expired and is no longer available.

Version 2

23251 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: differentiate between production manufacturing and custom building; describe stages in FRC trailer boat manufacture; identify resins and reinforcements used in FRC construction; describe the machinery used in trailer boat manufacture; describe the process used for developing new FRC trailer boat models; describe the range of typical mouldings used to make up a set of FRC trailer boat moulds; describe the stages in alloy trailer boat manufacture; and describe the process used for developing new alloy trailer boat models.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe filling and fairing technology used in boatbuilding
This standard has expired and is no longer available.

Version 2 This unit standard, unit standard 25155, and unit standard 25156 have been replaced by unit standard 29235.

25113 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe: filling and fairing systems used on boats; extenders used in boat filling and fairing systems; surface preparation requirements for boat filling and fairing; and boat filling and fairing techniques.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Mask and protect marine or composite surfaces for painting

Word  PDF

Version 3

25114 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to mark and mask fair lines on marine or composite items, and protect other surfaces during painting.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe, install and test plumbing systems in boats
This standard has expired and is no longer available.

Version 2 This unit standard was replaced by unit standard 31930.

25115 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people who work, or intend to work, as boatbuilders. People credited with this unit standard are able to describe, install and test simple plumbing systems in boats.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of timber used in boatbuilding

Word  PDF

Version 2 This unit standard and unit standard 25118 replaced unit standard 18168.

25117 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to describe timber classifications and types used in boatbuilding, describe types of timber cuts used in boatbuilding, and describe storage requirements and systems for boatbuilding timber.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of adhesives used in a marine or composites workplace

Word  PDF

Version 4 This unit standard and unit standard 25117 replaced unit standard 18168.

25118 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe adhesive types used in a marine or composites workplace; and describe surface preparation procedures and adhesive application methods.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Fair boat surfaces
This standard has expired and is no longer available.

Version 2 This unit standard, unit standard 25113, and unit standard 25156 have been replaced by unit standard 29235.

25155 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended to be used by people involved in the specialist filling and fairing sector of boat construction. People credited with this unit standard are able to check filled boat surfaces prior to fairing, and shape filler to achieve a fair surface.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Fill boat surfaces
This standard has expired and is no longer available.

Version 2 This unit standard, unit standard 25113, and unit standard 25155 have been replaced by unit standard 29235.

25156 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended to be used by people involved in the specialist filling and fairing sector of boat construction. People credited with this unit standard are able to identify the characteristics of boat surfaces requiring filling and fairing, and mix and apply filler.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Build metal boat framework

Word  PDF

Version 2

25157 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare materials and equipment, build metal boat framework, and fair metal boat framework.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine paint system repair

Word  PDF

Version 2

25998 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe preparation for the repair of marine paint system defects; explain priming, undercoating and filling processes used for marine paint system repairs; and describe finish coat application methods and feather edge treatment on marine paint system.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine electronic equipment types, functions and connection

Word  PDF

Version 2

27322 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: explain the function, installation and connection requirements of commonly installed marine electronic equipment; describe the procedures for programming, commissioning and troubleshooting of marine electronic equipment; explain marine electronic equipment selection considerations; and explain the integration and operation of GMDSS on marine electronic equipment.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain NMEA standards and proprietary on-board data communication systems

Word  PDF

Version 2

27325 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain NMEA standards and proprietary on-board data communication systems.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain AC system earthing and DC system grounding, and isolation safety requirements on vessels

Word  PDF

Version 2

27326 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain AC system earthing and DC system grounding, and isolation safety requirements on vessels.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe and apply filling and fairing technology

Word  PDF

Version 2 This unit standard replaced unit standard 25113, 25155, and 25156.

29235 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe filling and fairing systems; and describe and apply extenders, surface preparation requirements, and filling and fairing techniques.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Operate simple mechanical plant or equipment used in the marine or composite industry

Word  PDF

Version 2 This unit standard and unit standard 29236 replaced unit standard 18160.

29237 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare to operate, and operate simple mechanical plant or equipment used in the marine or composite industry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Dismantle, inspect, assemble and test simple marine system components

Word  PDF

Version 1

30770 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to dismantle, inspect, and repair or replace; assemble, and test simple marine system components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of forced air intake systems on a marine engine

Word  PDF

Version 1

30771 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of forced air intake systems on a marine engine, and explain servicing procedures of forced air intake systems.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Manually produce and interpret marine system engineering sketches

Word  PDF

Version 1

30775 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to manually produce and interpret marine system engineering sketches.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Produce marine components by performing engineering drilling operations

Word  PDF

Version 1

30777 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare for, and produce marine components by performing engineering drilling operations.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of maintenance and repair methods of wooden boats

Word  PDF

Version 1 This unit standard replaced unit standard 23037.

31196 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge on maintenance and repairs methods of wooden boats.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate basic knowledge of a carburettor system in a marine engine

Word  PDF

Version 1

31200 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of carburettor operations, explain the servicing procedures and fault diagnosis, and explain repair and replacement procedures for a carburettor in a marine engine.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of petrol and an electronic fuel injection (EFI) system for a marine engine

Word  PDF

Version 1

31202 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: petrol as a marine fuel; an electronic fuel injection (EFI) system operation for a marine engine; and procedures on fuel system checking and testing requirements.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Mix and apply stain to marine surfaces

Word  PDF

Version 1

31433 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard covers the skills required to mix and apply stain following a pre-determined formula. People credited with this unit standard are able to mix stain and apply to marine surfaces.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain exotic veneers used in marine interiors

Word  PDF

Version 1

31771 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain exotic veneers used in marine interiors.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Produce templates or patterns used in the marine industry

Word  PDF

Version 7

9922 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: select materials for, and produce templates or patterns used in the marine industry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Assemble metal components for joining in production boatbuilding under supervision
This standard has expired and is no longer available.

Version 6

9945 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare to assemble metal components; perform assembly of metal components under supervision; and verify the assembly of metal components. This unit standard is applicable to boat builders working in aluminium or steel.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Fill and fair boat surfaces
This standard has expired and is no longer available.

Version 3 This unit standard has been replaced by unit standard 25155 and unit standard 25156.

9950 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify the characteristics of boat surfaces requiring filling and fairing; mix and apply filler; and reduce filler to a fair surface.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Level 4

Draw full sized hulls, decks, and superstructures from corrected offsets
This standard has expired and is no longer available.

Version 5 This unit standard and unit standard 10839 have been replaced by unit standard 23242.

10840 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare for drawing full sized hulls, decks, and superstructures, and produce full sized drawings of hulls, decks, and superstructures. They are able to work unsupervised.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Produce a half-model to scale

Word  PDF

Version 7

10841 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare to produce a half-model; produce templates to scale; and produce a half-model to scale.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install and test custom power plants and power trains

Word  PDF

Version 5

11778 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for installation; install and align; and test installed power plants and power trains.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Determine repair requirements for inboard power plants and power trains
This standard has expired and is no longer available.

Version 6

11780 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify faults with inboard power plants and power trains and their causes; establish the technical viability of repair; and establish repair action with customers.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Preserve and evaluate a previously-submerged power plant

Word  PDF

Version 5

11781 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to, for a previously-submerged power plant: prevent further deterioration; identify the nature and extent of damage; and evaluate action required to restore operational effectiveness.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Maintain and repair marine engine systems

Word  PDF

Version 5

11782 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify maintenance and repair requirements for marine engine systems; carry out maintenance and repairs for marine engine systems.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Maintain, repair and recondition inboard engine systems
This standard has expired and is no longer available.

Version 6

11783 Unit Standard 40 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: analyse maintenance and repair requirements for inboard engine systems; carry out maintenance, repairs and reconditioning; and recommission and hand over systems and components.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Anti-foul a boat

Word  PDF

Version 6

11786 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: remove fouling from underwater areas; select preparation and coating methods and product range; and anti-foul a boat.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Evaluate, clean, and prepare wooden substrates for marine surface coatings

Word  PDF

Version 5

11787 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to evaluate, clean, and prepare wooden substrates for marine surface coatings.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Evaluate, clean, and prepare fibre-reinforced composite substrates for surface coatings

Word  PDF

Version 5

11788 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to evaluate, clean, and prepare fibre-reinforced composite (FRC) substrates for surface coatings.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Evaluate, clean, and prepare steel substrates for marine surface coatings

Word  PDF

Version 5

11789 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to evaluate, clean, and prepare steel substrates for marine surface coatings.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Evaluate, clean, and prepare aluminium substrates for marine surface coatings

Word  PDF

Version 5

11790 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to evaluate, clean, and prepare aluminium substrates for marine surface coatings.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Prepare for, and apply build coats and finish coats for marine exterior paint surfaces

Word  PDF

Version 8

11791 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: carry out preparation, prepare the previous coat, and apply build coats and finish coats for marine exterior paint surfaces.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Apply clear marine surface coats
This standard has expired and is no longer available.

Version 7

11792 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: carry out preparation for varnishing; prepare the previous coat; and apply coatings. This unit standard applies to exterior surfaces only.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Mark and prepare fair lines for the application of marine graphics
This standard has expired and is no longer available.

Version 6

11793 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to mark fair lines, and prepare fair lines for painting.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Commission marine electrical and electronic systems and equipment

Word  PDF

Version 7

11795 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to, for marine electrical and electronic systems and equipment: establish commissioning criteria; check equipment and system installations; check system performance against criteria and calibrate equipment; and complete post instalment processes and documentation.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Form and shape compound aluminium plate for boats

Word  PDF

Version 2

23038 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are alloy boat/shipbuilders and are able to: establish plate forming information; select and cut plate; mark plate for forming; and set up wheeling machine.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of yacht spar and rigging systems

Word  PDF

Version 2

23040 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain: spinnaker and gennaker systems; rig related sail storage systems; reefing systems and vang systems; and hydraulic rigging systems.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Perform calculations for marine paint systems

Word  PDF

Version 2

23045 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: explain and calculate measurement of solids in marine paint; calculate film thicknesses of marine paints; describe paint curing considerations and calculate curing times.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain defects in marine paint finishes

Word  PDF

Version 2

23048 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain defects in marine paint finishes.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of composite technology for a marine or composite industry

Word  PDF

Version 3

23049 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: explain laminate configurations; describe resin system characteristics; explain fibre reinforcements and core materials; explain the performance of cured resins, and describe hardness testing methods for fillers and resins used in composite construction.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Loft a boat hull

Word  PDF

Version 3 This unit standard replaced unit standard 10837, unit standard 10838, and unit standard 10842.

23241 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: lay out a lofting grid; prepare for drawing full sized hulls; produce full sized hull drawings; develop transoms and stems; and lift bevels from loftings and deduct planking thickness.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Loft full sized decks and superstructures

Word  PDF

Version 2 This unit standard replaced unit standard 10839 and unit standard 10840.

23242 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare materials, tools, and equipment for lofting full sized decks and superstructures; produce full sized deck and superstructure drawings; loft deck cambers; and develop deck detail.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain the causes and prevention of material deterioration in the marine environment

Word  PDF

Version 3

23243 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is designed to raise awareness of material deterioration so that it can be identified at an early stage, and is applicable to all sectors of the marine industry. It is also applicable to recreational boat users. People credited with this unit standard are able to explain, in the context of the marine environment, the following: effects of environmental factors on materials used; metal deterioration and its prevention; timber deterioration and its prevention; and manufactured materials deterioration and its prevention.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install electrical systems in a production trailer boat

Word  PDF

Version 2

23249 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare materials and equipment and install electrical wiring system in a production trailer boat.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of production trailer boat design

Word  PDF

Version 2

23252 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain: production trailer boat hull designs; the performance factors in trailer boats; production trailer boat construction design elements.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Join a composite production trailer boat hull and deck

Word  PDF

Version 2

23253 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare materials and equipment to join, and join a boat hull and deck.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install an outboard motor on a production trailer boat

Word  PDF

Version 2

23255 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: confirm plan for installing an outboard motor; install motor ancillary and electrical components; and install an outboard motor on a production trailer boat.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of quality control for trailer boat production

Word  PDF

Version 2

23256 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain quality control principles for trailer boat production, and explain external quality standards.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of, and install a production trailer boat fuel system

Word  PDF

Version 2

23257 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of a production trailer boat fuel system; install a fuel tank; install pipework, fillers and breathers; and, connect and test a fuel system.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Describe and safely control work aloft on yacht rigs

Word  PDF

Version 2 This unit standard, unit standard 25121, unit standard 25122, unit standard 25123, and unit standard 25151 replaced unit standard 9951 and unit standard 9952.

25119 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify reasons for working aloft on yacht rigs; describe working protocol for lifting people aloft; describe potential influences of environment when working aloft; identify, inspect, and test lifting components; safely use lifting components; and communicate with a person working aloft.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of the design and specification of yacht spars and rigging

Word  PDF

Version 2

25120 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: explain the requirements of a yacht rig design specification; identify yacht spar material attributes; explain engineering principles applicable to yacht rigs; identify yacht rig tensioning and measuring systems; explain mast deck support and waterproofing types; and identify rig regulatory requirements.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Maintain yacht spars, rigging and hardware

Word  PDF

Version 2 This unit standard, unit standard 25119, unit standard 25122, unit standard 25123, and unit standard 25151 replaced unit standard 9951 and unit standard 9952.

25121 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to determine specifications for yacht spar, rigging, and hardware maintenance; and carry out maintenance.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install and remove yacht spars and rigging

Word  PDF

Version 2 This unit standard, unit standard 25119, unit standard 25121, unit standard 25123, and unit standard 25151 replaced unit standard 9951 and unit standard 9952.

25122 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for installation or removal of yacht spars and rigging; step rig in vessel; remove rig from vessel; and commission and test a rig installation.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Interpret, select, and assemble components of yacht spars and rigging

Word  PDF

Version 2 This unit standard, unit standard 25119, unit standard 25121, unit standard 25122, and unit standard 25151 replaced unit standard 9951 and unit standard 9952.

25123 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: interpret rigging components from a rig design and specification plan; select identified rigging components; and assemble rigging components ready for fitting.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Fabricate yacht rigging

Word  PDF

Version 2 This unit standard, unit standard 25119, unit standard 25121, unit standard 25122, and unit standard 25123 replaced unit standard 9951 and unit standard 9952.

25151 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: confirm specification for rigging fabrication; prepare for fabrication of rigging; and fabricate rigging.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Apply 2D CAD/CAM in boatbuilding

Word  PDF

Version 5

25152 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: produce and export 2D CAD boat drawings; import 2D CAD boat drawings and produce boat components using a CNC machine; and check machined boat components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain computerised manufacturing processes used in the marine or composite industry

Word  PDF

Version 2

25153 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain CNC technologies that may be used in the marine or composite industry and explain the application of CNC and CAM technologies in the marine or composite industry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Prepare for and apply a marine interior coating system

Word  PDF

Version 3

25154 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to carry out preparation for marine interior coating, prepare surfaces of previous interior paint coats, and apply marine interior coating.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Repair marine paint systems
This standard has expired and is no longer available.

Version 2 This unit standard was replaced by unit standard 31431.

25999 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare an existing marine paint system for repair; prime and fill the area of repair on a marine paint system; and apply finish coat on marine paint system repairs.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Demonstrate knowledge of and apply sustainability concepts in the boatbuilding industry
This standard has expired and is no longer available.

Version 2 This unit standard has been replaced by unit standard 29238.

26082 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: energy consumption in the boatbuilding process and strategies for reducing energy use; energy use and reduction strategies on boats; sustainability practices in the marine environment; and environmental compliance requirements in boatbuilding. They can explain environmental considerations for sustainability in the boatbuilding industry; and apply sustainability practices in the boatbuilding environment.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Demonstrate knowledge of trim and stability variation on vessels
This standard has expired and is no longer available.

Version 3

26090 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of trim and stability variation on vessels.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Assess marine paint preparation and finishes

Word  PDF

Version 2

26091 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to assess marine paint preparation and finishes.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine electrical power supply, monitoring and charging systems

Word  PDF

Version 2

27319 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of marine battery charging; describe and draw marine battery system wiring circuits; and explain marine battery monitoring systems.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of documentation and compliance requirements for marine electrical systems

Word  PDF

Version 3

27320 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: rules and standards to meet compliance requirements for marine electrical systems; and good electrical system documentation practice.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine electrical digital switching systems

Word  PDF

Version 2

27321 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of marine electrical digital switching systems.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine genset electrical installation, maintenance and troubleshooting

Word  PDF

Version 2

27323 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: marine genset types and installations; engine powered genset systems; and commissioning, maintenance and fault finding for gensets.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain and interpret electronic system schematic and connection drawings on vessels

Word  PDF

Version 2

27324 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain and interpret electronic system schematic and connection drawings on vessels.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Operate mechanical plant used in a marine or composite workplace

Word  PDF

Version 2 This unit standard and unit standard 29237 replaced unit standard 18160.

29236 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare to operate, and operate mechanical plant used in a marine or composite workplace.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate and apply knowledge of sustainability practices in a marine or composite industry

Word  PDF

Version 2 This unit standard replaced unit standard 26082

29238 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of energy consumption in a marine or composite process; explain environmental considerations for sustainability; and apply sustainability work practices in the marine or composite industry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Collaborate within a project team in the marine or composite industry

Word  PDF

Version 2

29546 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to collaborate within a project team in the marine or composite industry; and evaluate the action plan in relation to the completion of the project.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Cut metal by thermal processes in the marine industry

Word  PDF

Version 1

30203 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare material and equipment for cutting metals and cut metal using thermal processes in the marine industry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of marine electrical systems

Word  PDF

Version 1

30204 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain the electrical systems in a boat and explain the corrosion protection for electrical system components in a boat.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Fabricate boat components

Word  PDF

Version 1

30206 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: explain boat component fabrication processes; prepare resources; and fabricate boat components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Form and shape light fabrication materials for boat components

Word  PDF

Version 2

30207 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare materials, tools, equipment and machinery, and form and shape light fabrication materials for boat components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Lay out and mark off light fabrication boat components

Word  PDF

Version 1

30208 Unit Standard 25 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare materials and equipment, and lay out and mark off light fabrication boat components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Weld aluminium boat components

Word  PDF

Version 1

30209 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare to weld, and weld aluminium boat components in all welding positions.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Dismantle, inspect, assemble and test complex marine system components

Word  PDF

Version 1

30769 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: dismantle; inspect, and repair or replace; and assemble, and test complex marine system components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Inspect and test air intake and exhaust systems of a marine diesel engine

Word  PDF

Version 1

30773 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to inspect and test an air intake system, and an exhaust system of a marine diesel engine.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Interpret installation plan and marine engineering drawings

Word  PDF

Version 1

30774 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to interpret installation plan and marine engineering drawings.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Perform servicing tasks on a marine diesel fuel system

Word  PDF

Version 1

30776 Unit Standard 2 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to remove and replace marine diesel fuel injectors and filters.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Produce marine components by performing engineering turning operations

Word  PDF

Version 1

30778 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare for, and perform turning operations to produce marine components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Weld metal boat components in all positions

Word  PDF

Version 1

30779 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare to weld, and weld metal boat components in all positions.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Weld metal boat components in common pipe welding positions

Word  PDF

Version 1

30780 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare to weld, and weld metal boat components in common pipe welding positions.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Diagnose, repair, and test marine engine electrical wiring faults

Word  PDF

Version 1

31203 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of a marine engine electrical wiring diagram; diagnose and repair marine engine electrical wiring faults; and test marine engine electrical circuits.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Dismantle, check, and rectify cylinder head of a marine engine

Word  PDF

Version 1

31207 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: dismantle and check cylinder head; and rectify cylinder head faults of a marine engine.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Test and rectify faults in marine engine charging and starting systems

Word  PDF

Version 1

31212 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to test and rectify faults in marine engine charging and starting systems.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Test, diagnose and rectify marine electronic fuel injection (EFI) system

Word  PDF

Version 1

31213 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to test, diagnose, and rectify electronic fuel injection (EFI) system faults on a marine engine.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Apply knowledge of marine paint system repair

Word  PDF

Version 1 This unit standard replaced unit standard 25999.

31431 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare surface for the repair of marine paint system defects; apply priming, undercoating, and filling processes for marine paint system repairs; and apply finish coat application and feather edge treatment on a marine paint system.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Demonstrate knowledge of and create a controlled environment for coating in boatbuilding projects

Word  PDF

Version 1

31432 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to, for boatbuilding coating projects: explain environmental factors to be controlled; explain methods to control environmental factors; and create a controlled environment.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Apply paint by spray methods for a marine surface

Word  PDF

Version 1

31434 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare surface, materials, and equipment for spray painting a marine surface; and apply paint by spray methods for a marine surface.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Overlay interior linings for marine interiors

Word  PDF

Version 1

31772 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare to overlay; and overlay interior linings for marine interiors.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain, install, and test fuel systems in boats

Word  PDF

Version 1 This unit standard replaced unit standard 25115.

31930 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain, install, and test fuel systems in boats.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Handcraft and fix trim mouldings for marine interiors

Word  PDF

Version 1

31936 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare to handcraft and fix trim mouldings; and handcraft and fix trim mouldings for marine interiors.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install internal and external boat hardware fittings

Word  PDF

Version 7

9923 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for installation of internal and external boat hardware fittings, and carry out internal and external boat hardware fitting installation.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Carry out the repair, restoration, and structural alteration of wooden boats
This standard has expired and is no longer available.

Version 7

9927 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: establish job requirements for the repair, restoration, and structural alteration of wooden boats; prepare boats for the required work; carry out the required work; and prepare boats for handing over to clients.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Plank a boat framework

Word  PDF

Version 6

9930 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain planking types, methods, and materials used in wooden boat building, prepare and select materials, and plank a boat framework.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Overlay boat decks with teak
This standard has expired and is no longer available.

Version 5

9931 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: select teak decking method and materials; prepare teak for fitting and fixing; fit and fix teak to substrates; and make teak planking watertight.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install interior boat cabinetry

Word  PDF

Version 6

9932 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare for, and carry out, the installation of interior boat cabinetry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install exterior boat joinery, hatches, and components

Word  PDF

Version 7

9933 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for, and carry out the installation of exterior boat joinery, hatches, and components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Construct interior support structures for boats

Word  PDF

Version 5

9934 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to determine requirements to construct interior support structures, prepare materials and equipment, and construct interior support structures.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Construct interior boat cabinetry in timber

Word  PDF

Version 5

9935 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to determine requirements to construct interior boat cabinetry, prepare materials and equipment for interior boat cabinetry construction, and construct interior boat cabinetry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Construct exterior boat joinery in timber

Word  PDF

Version 6

9936 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to determine requirements, and prepare materials and equipment, to construct exterior boat joinery in timber, and construct exterior boat joinery.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Install interior and exterior boat systems

Word  PDF

Version 6

9937 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare for, and carry out, the installation of interior and exterior boat systems.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain and install pipework in boats

Word  PDF

Version 6

9938 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain pipework in boats, prepare materials and tools, and install pipework in boats. This unit standard is for people who work, or intend to work, as marine engineers or boatbuilders.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Build boat frameworks in timber
This standard is expiring. The last date for assessment to take place is 31 December 2025.

Word  PDF

Version 6

9939 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: construct a building jig or set up a building floor for building boat frameworks in timber; manufacture framework members; install and secure framework members; and fair the members and framework. This unit standard is applicable to the construction of boats to be finished in timber and fibre-reinforced composites (FRC).

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Plank and glass sheathe a mould or boat

Word  PDF

Version 7

9940 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: select planking and sheathing materials for boatbuilding; prepare planking for fitting and fixing; fit and fix timber to a framework; and sheath with FRC.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Carry out the repair, restoration, and structural alteration of fibre-reinforced composite boats
This standard has expired and is no longer available.

Version 7

9941 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: establish job requirements for the repair, restoration, and structural alteration of boats; prepare boats for the required work; carry out the required work; and prepare boats for handing over to clients.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Construct internal and external boat joinery in fibre-reinforced composites (FRC)
This standard has expired and is no longer available.

Version 7

9942 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: establish job requirements for the construction of internal and external boat joinery; prepare for joinery construction; and construct joinery to specifications.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Carry out the repair, restoration, and structural alteration of aluminium boats
This standard has expired and is no longer available.

Version 7

9943 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: establish job requirements for the repair, restoration, and structural alteration of aluminium boats; prepare boats for the required work; carry out the required work; and prepare boats for handing over to clients.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Join complex metal boat components

Word  PDF

Version 5

9946 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare, join, and verify joining of complex metal boat components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Carry out the repair, restoration, and structural alteration of steel boats
This standard has expired and is no longer available.

Version 6

9948 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: establish job requirements for the repair, restoration, and structural alteration of steel boats; prepare boats for the required work; carry out the required work; and prepare boats for handing over to clients.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Manufacture, assemble, and maintain spars and rigging
This standard has expired and is no longer available.

Version 3 This unit standard and unit standard 9952 have been replaced by unit standard 25119, unit standard 25121, unit standard 25122, unit standard 25123, and unit standard 25151.

9951 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: obtain the required rigging componentry and establish work sequence; obtain spar parts and assemblies and establish work sequence; fabricate spars and components; connect running and standing rigging to spars; prepare the rig for transportation and stepping; and disassemble and maintain spars and rigging. This unit standard applies to boat riggers and boatbuilders.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Level 5

Produce fair lines for boatbuilding from uncorrected offsets
This standard has expired and is no longer available.

Version 5 This unit standard, unit standard 10837, and unit standard 10838 have been replaced by unit standard 23241.

10842 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to identify anomalies in supplied offsets, and modify drawn lines. They are able to work unsupervised. This unit standard is designed for people within the boating industry who are required to draw full sized boat components from offsets supplied by boat designers.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Manage maintenance, repair, and reconditioning contracts for inboard power plants and trains
This standard has expired and is no longer available.

Version 6

11776 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: establish customer requirements for the maintenance, repair and reconditioning of inboard power plants and power trains; identify regulatory requirements; evaluate the viability of repairs and reconditioning; reach agreement with customers and document the work required; and hand over completed work to customers.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Plan the installation of inboard power plants and power trains

Word  PDF

Version 5

11779 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: specify installation locations and measurements for inboard power plants and power trains, and plan the installation process.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Specify marine surface coating systems to meet customer's requirements
This standard has expired and is no longer available.

Version 6

11785 Unit Standard 50 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify customer''s requirements for marine surface coating systems; identify finish requirements imposed by boat features; and specify finishes to meet requirements.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Maintain and repair marine electronic systems and equipment
This standard has expired and is no longer available.

Version 7

11796 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: assess marine electronic maintenance and repair requirements; carry out maintenance and repairs; recommission systems and equipment; and complete documentation.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Maintain and repair marine electrical systems and equipment
This standard has expired and is no longer available.

Version 7

11797 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: assess marine electrical maintenance and repair requirements; carry out maintenance and repairs; recommission systems and equipment; and complete documentation.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Analyse requirements, and supervise and lead the laying out, marking and cutting of vessel construction materials
This standard has expired and is no longer available.

Version 3

26083 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to analyse requirements for and supervise and lead the laying out, marking, and cutting of vessel construction materials.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Plan and communicate a work schedule and supervise and lead a project team for construction of a boat module

Word  PDF

Version 2

26084 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: plan and communicate a work schedule for a boat module to a team, supervise and lead a team to complete boat module construction.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Supervise the use and care of portable power tools in boatbuilding
This standard has expired and is no longer available.

Version 3

26085 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to check the workplace power tool inventory in boatbuilding, and supervise the use and care of portable power tools in boatbuilding.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Verify machine operation, train users and supervise machine operation in boatbuilding
This standard has expired and is no longer available.

Version 3

26086 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to verify machine operation in boatbuilding, and train users and supervise the use and care of machines in boatbuilding.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain costing and estimate pricing for a complex boatbuilding project

Word  PDF

Version 2

26087 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain costs, and make an estimate of price, for a complex boatbuilding project.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain regulatory compliance in boatbuilding

Word  PDF

Version 3

26088 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: classification society regulatory compliance for vessels; New Zealand maritime compliance rules for design, construction and equipment of commercial craft; international regional rules for vessel construction; and standards that may be used to prove compliance with vessel construction rules.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain cathodic protection for marine vessels

Word  PDF

Version 3

26092 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain: the process of metal corrosion on vessels; types of cathodic protection of vessels; electrolysis, electrolytic and stray current corrosion; and the potential effects and prevention of over protection on aluminium alloy vessels.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Determine scantlings for a wooden boat
This standard has expired and is no longer available.

Version 3

26094 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to verify the scantling determination method and determine scantlings for a hull and deck structure.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Test properties of boatbuilding timber
This standard has expired and is no longer available.

Version 2

26095 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to select boatbuilding timber for testing and conduct tests of boatbuilding timber.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Shutdown and isolate hydraulic equipment on a vessel being constructed or maintained
This standard is expiring. The last date for assessment to take place is 31 December 2025.

Word  PDF

Version 3

26097 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to prepare for shutdown and isolation of hydraulic equipment, and shutdown and isolate hydraulic equipment on a vessel being constructed or maintained.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Supervise and survey hull welding to classification society requirements
This standard has expired and is no longer available.

Version 3

26098 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to supervise and survey hull welding to classification society requirements.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Determine requirements and supervise the dismantling, inspection, assembly and testing of boat components
This standard has expired and is no longer available.

Version 3

26100 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: determine the requirements for dismantling, inspection, assembly and testing of boat components; and supervise the dismantling, inspection, assembly and testing of boat components.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Interpret installation requirements and plan a complex plumbing system installation for a vessel

Word  PDF

Version 3

26101 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: interpret installation requirements for a complex plumbing system on a vessel; and plan a complex plumbing system installation for a vessel.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Interpret installation requirements and plan a tankage system installation for a vessel

Word  PDF

Version 3

26102 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to interpret requirements for installation of tankage systems on a vessel and plan a tankage system installation on a vessel.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Interpret installation requirements and plan a hydraulic system installation for a vessel

Word  PDF

Version 3

26103 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to interpret installation requirements for a hydraulic system on a vessel, and plan a hydraulic system installation on a vessel.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Interpret installation requirements and plan a refrigeration system installation for a vessel
This standard has expired and is no longer available.

Version 2

26104 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to interpret requirements for installation of a refrigeration system on a vessel, and plan a refrigeration system installation on a vessel.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Determine requirements and plan an air conditioning system installation for a vessel
This standard has expired and is no longer available.

Version 2

26105 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to determine requirements for an air conditioning system installation on a vessel and plan an air conditioning system installation on a vessel.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Interpret installation requirements and plan a custom power plant and power train installation on a vessel
This standard has expired and is no longer available.

Version 3

26106 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to interpret requirements for installation of a custom power plant and power train system on a vessel and plan a power plant and power train system installation on a vessel.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Apply 3D CAD/CAM in boatbuilding

Word  PDF

Version 4

26107 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: produce and export 3D CAD boat drawings; import 3D CAD boat drawings and produce boat components using a multi axis CNC machine; and check machined boat components.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain the prevention of fouling and corrosion in saltwater pipework on vessels
This standard has expired and is no longer available.

Version 3

26108 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain saltwater pipework biofouling and prevention on vessels and corrosion considerations and prevention.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Implement communication strategies for a complex project in the marine or composite industry

Word  PDF

Version 1

30202 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to research and select strategies for effective communication relevant to a complex project, implement and evaluate a complex project in the marine of composite industry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Supervise the construction, repair, restoration, and structural alteration of boats
This standard has expired and is no longer available.

Version 6

9926 Unit Standard 25 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to maintain the technical standard of boatbuilding activities, and identify boatbuilding problems and take action. This unit standard is relevant to personnel in the boatbuilding industry who are responsible for the supervision of boatbuilding activities. It seeks to identify and recognise the skills that are required to contextualise generic supervision skills.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Install masts, spars, and make and fit rigging
This standard has expired and is no longer available.

Version 5 This unit standard and unit standard 9951 have been replaced by unit standard 25119, unit standard 25121, unit standard 25122, unit standard 25123, and unit standard 25151.

9952 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: manufacture rigging using machine and hand splicing; prepare for installation of the rig; install, fix, and tune rig; connect ancillaries; and remove and service rigging. This unit standard applies to boat builders, and to mast and spar makers.

Standard-setting body:

NZ Marine and Composites Industry Training Organisation

Level 6

Select marine power plant and power train components
This standard has expired and is no longer available.

Version 6

11784 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: analyse motive power requirements for specific boats; produce specifications to meet motive power requirements; and select components to match motive power requirements.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Explain and plan project scope and control processes in a marine or composite project

Word  PDF

Version 3

26089 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to explain the function and purpose of elements of the project definition; explain project control requirements and processes; and plan project scope and control processes in a marine or composite project.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Produce a work schedule and resourcing plan for a composite boat structure

Word  PDF

Version 3

26093 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to produce a work schedule and resourcing plan for a composite boat building project.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Produce a work schedule and resourcing plan for a wooden boat structure
This standard has expired and is no longer available.

Version 3

26096 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to plan a work schedule and resourcing for a wooden boat building project.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Produce a work schedule and resourcing plan for a metal boat structure
This standard has expired and is no longer available.

Version 3

26099 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to plan a work schedule and resourcing for a metal boat building project.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Develop and manage a risk management plan for a complex project in the marine or composite industry

Word  PDF

Version 1

30205 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are develop a health and safety plan, develop environmental documentation, and manage health and safety plan for a complex project in the marine or composite industry.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Manage a marine construction contract

Word  PDF

Version 5

9924 Unit Standard 40 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: evaluate client requirements for marine construction; agree the contract with client; liaise with client during the construction process; and hand over completed marine construction to client.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Manage contracts for the repair, restoration, and structural alteration of boats
This standard is expiring. The last date for assessment to take place is 31 December 2025.

Word  PDF

Version 7

9925 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: establish clients'' repair, restoration and structural alteration requirements; evaluate the viability of repairs, restorations and structural alterations; reach agreement with clients and document the work required; and hand over the completed work to clients.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Commission a single boat system

Word  PDF

Version 5

9928 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for commissioning a single boat system, test and evaluate a single boat system, and hand over the single boat system to the client.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Level 7

Design marine electronic systems
This standard is expiring. The last date for assessment to take place is 31 December 2025.

Word  PDF

Version 7

11798 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify customer requirements; design marine electronic systems to match client requirements and boat characteristics; and complete documentation.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Design marine electrical control and monitoring systems

Word  PDF

Version 6

11799 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify customer requirements; design systems to match client requirements and boat characteristics; and complete documentation.

Consent & Moderation Requirements:

CMR 136 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Commission a boat
This standard is expiring. The last date for assessment to take place is 31 December 2025.

Word  PDF

Version 6

9929 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for boat commissioning; test and evaluate overall boat performance and the performance of its systems; and hand over boats to clients. This unit standard is applicable to people such as boatbuilders, surveyors, project managers, and supervisors, who are required to commission overall boat handling performance and coordinate the commissioning, by other personnel, of individual boat systems.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Determine method of construction for metal boatbuilding
This standard has expired and is no longer available.

Version 6

9947 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to identify available metal boatbuilding construction options, and select construction methods. This unit standard is applicable to boat builders working in aluminium or steel.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council

Data as at 20 May 2024