Domain - Operation of Energy and Chemical Plant

Domain - Operation of Energy and Chemical Plant

Search Standards

All unit standards registered on the Directory of Assessment Standards may be accessed here. 

TOP > Manufacturing > Energy and Chemical Plant > Operation of Energy and Chemical Plant

Qualifications Domain-full

No qualifications currently registered at this level. Also check fields and sub-fields.

Assessment Standards

Hide education organisations, CMR & purpose  »

Level 2

Operate boiler house fire and safety systems
This standard has expired and is no longer available.

Version 3

16295 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify plant personnel safety systems; demonstrate knowledge of fire and the different types of fire safety equipment encountered on the plant; use fire safety equipment; and identify plant chemicals and their implications for plant safety. This unit standard is for operators who are responsible for boilers operating between 1.2 megawatts and 6 megawatts as defined in the Approved Code of Practice for the Design, Safe Operation, Maintenance and Servicing of Boilers in the workplace and subsequent amendments.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Supervise and monitor an unattended boiler
This standard has expired and is no longer available.

Version 3 This unit standard has been replaced by unit standard 21460.

16296 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the unattended boiler and auxiliary plant; operate the boiler and auxiliary plant; monitor unattended boiler and auxiliary plant; and operate and monitor boiler feed water for an unattended boiler. This unit standard is for operators who are responsible for unattended boilers as defined in the Approved Code of Practice for the Design, Safe Operation, Maintenance and Servicing of Boilers in the workplace and subsequent amendments.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Demonstrate knowledge of the basic principles of, and equipment used for, steam generation
This standard has expired and is no longer available.

Version 3 This unit standard, unit standard 4554, unit standard 4555, unit standard 16298, and unit standard 16299 have been replaced by unit standard 21461, unit standard 21462, and unit standard 21463.

16297 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of steam generation equipment and steam generation auxiliary fittings. This unit standard is for operators who are responsible for boilers operating between 1.2 megawatts and 6 megawatts as defined in the Approved Code of Practice for the Design, Safe Operation, Maintenance and Servicing of Boilers in the workplace and subsequent amendments.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Demonstrate knowledge of the basic auxiliary equipment and systems used for steam generation
This standard has expired and is no longer available.

Version 3 This unit standard, unit standard 4554, unit standard 4555, unit standard 16297, and unit standard 16299 have been replaced by unit standard 24161, unit standard 21462, and unit standard 21463.

16298 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of combustion: air systems, steam generation fuel systems, and steam generation boiler feed water systems. This unit standard is for operators who are responsible for boilers operating between 1.2 megawatts and 6 megawatts as defined in the Approved Code of Practice for the Design, Safe Operation, Maintenance and Servicing of Boilers in the workplace and subsequent amendments.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate and monitor a 1.2 megawatts to 6 megawatts boiler and auxiliary plant
This standard has expired and is no longer available.

Version 3 This unit standard, unit standard 4554, unit standard 4555, unit standard 16297, and unit standard 16298 have been replaced by unit standard 21461, unit standard 21462, and unit standard 21463.

16299 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of, operate, and monitor a 1.2 megawatts to 6 megawatts boiler and auxiliary plant. This unit standard is for operators who are responsible for boilers between 1.2 megawatts and 6 megawatts as defined in the Approved Code of Practice for the Design, Safe Operation, Maintenance and Servicing of Boilers in the workplace and subsequent amendments.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Demonstrate knowledge of properties of raw water and its uses in energy and chemical plant
This standard has expired and is no longer available.

Version 6

17603 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of: raw water chemistry; physical actions on raw water; and raw water types and uses, water standards, and potable water, in energy and chemical plant.

Standard-setting body:

Primary Industry Training Organisation (NZITO) Primary Industry Training Organisation

Demonstrate knowledge of air conditioning systems on energy and chemical plant
This standard has expired and is no longer available.

Version 6

17605 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of air conditioning systems and configurations, and explain the operation of air conditioning systems, on energy and chemical plant.

Standard-setting body:

Primary Industry Training Organisation (NZITO) Primary Industry Training Organisation

Operate geothermal steamfield equipment and processes
This standard has expired and is no longer available.

Version 6 This unit standard has been replaced by unit standard 28159 and unit standard 28160.

17607 Unit Standard 9 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of geothermal energy and reservoirs, geothermal steam, and steamfield equipment; and operate geothermal steamfield equipment and processes.

Standard-setting body:

Primary Industry Training Organisation (NZITO) Primary Industry Training Organisation

Demonstrate basic knowledge of chemistry relevant to energy and chemical processes

Word  PDF

Version 4

19418 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of chemical concepts and the chemistry of hydrocarbons relevant to energy and chemical processes.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Operate an auxiliary internal combustion engine on energy and chemical plant
This standard has expired and is no longer available.

Version 8

3052 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of auxiliary internal combustion engines in the energy and chemical industry, and operate an auxiliary internal combustion engine at an energy and chemical plant.

Standard-setting body:

Primary Industry Training Organisation (NZITO) Primary Industry Training Organisation

Operate fired pressure equipment (under 20Mw) in an energy and chemical environment
This standard has expired and is no longer available.

Version 5 This unit standard, unit standard 4555, unit standard 16297, unit standard 16298, and unit standard 16299 have been replaced by unit standard 21461, unit standard 21462, and unit standard 21463.

4554 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the different types of fired pressure equipment encountered in the energy and chemical industry; operate fired pressure equipment; and identify and respond to deviations from normal conditions. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate steam generation equipment (under 20Mw) used in an energy and chemical environment
This standard has expired and is no longer available.

Version 5 This unit standard, unit standard 4554, unit standard 16297, unit standard 16298, and unit standard 16299 have been replaced by unit standard 21461, unit standard 21462, and unit standard 21463.

4555 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the different types of steam generation equipment encountered in the energy and chemical industry; operate steam generation equipment; and identify and respond to deviations from normal conditions. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate pipework and fittings in an energy and chemical environment
This standard has expired and is no longer available.

Version 5

4556 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of pipe work and fittings; operate pipework and fittings; and identify and respond to deviations from normal conditions. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate boiler feed water treatment systems (under 20Mw) in an energy and chemical environment
This standard has expired and is no longer available.

Version 6

4557 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of boiler feed water processes encountered in industry; operate boiler feed water treatment equipment and processes; and collect and interpret data. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate steam turbines (under 20Mw) in an energy and chemical environment
This standard has expired and is no longer available.

Version 5 This unit standard and unit standard 3044 have been replaced by unit standard 21458.

4558 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of different types of steam turbine encountered in the energy and chemical industry; operate steam turbines; and identify and respond to deviations from normal conditions. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate common valves on energy and chemical plant
This standard has expired and is no longer available.

Version 7

4559 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the common types of valves encountered in the energy and chemical industry; operate valves; and monitor valves, at an energy and chemical plant.

Standard-setting body:

Primary Industry Training Organisation (NZITO) Primary Industry Training Organisation

Operate two way communication equipment in an energy and chemical environment
This standard has expired and is no longer available.

Version 5

5868 Unit Standard 1 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to outline plant communication systems for use in both operational and emergency situations, and demonstrate knowledge of their functions and use communication systems. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate refrigeration equipment in an energy and chemical environment
This standard has expired and is no longer available.

Version 5 This unit standard and unit standard 3038 have been replaced by unit standard 21454.

5869 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of refrigeration equipment encountered in the industry; operate refrigeration equipment; and identify and respond to deviations from normal conditions. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation dairy process, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Level 3

Demonstrate knowledge of distillation equipment in an energy and chemical plant

Word  PDF

Version 4 This unit standard and unit standard 18733 replaced unit standard 9615.

18423 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of energy and chemical distillation processes and associated equipment; demonstrate knowledge of energy and chemical distillation equipment control and protection systems; and describe design and construction of energy and chemical distillation equipment; in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of pipework and fittings used in an energy and chemical plant

Word  PDF

Version 6

21459 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy or chemical plant. People credited with this unit standard are able to demonstrate knowledge of: pipework; and pipe fittings used in an energy and chemical plant; and flow as it relates to pipework used in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of the basic principles of steam generation and combustion relating to boiler operation

Word  PDF

Version 5 This unit standard, unit standard 21462, and unit standard 21463 replaced unit standard 4554, unit standard 4555, unit standard 16297, unit standard 16298, and unit standard 16299.

21461 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators. People credited with this unit standard are able to: demonstrate knowledge of: the basic principles of steam generation relating to boiler operation; and the principles of combustion, combustion process efficiency, and methods used to provide combustion air to boilers.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of the equipment and systems used for steam generation in boilers

Word  PDF

Version 5

21462 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators in an energy and chemical plant. People credited with this unit standard are able to: demonstrate knowledge of steam generation equipment and fittings; describe combustion air equipment; describe steam generation fuel systems and burner equipment; and demonstrate knowledge of feedwater equipment and lay-up, in boilers.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of basic thermodynamics relevant to the energy and chemical industry

Word  PDF

Version 5

21464 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and process operators in an energy and chemical plant. People credited with this unit standard are able to demonstrate knowledge of: basic thermodynamics; the basics of energy; and the basics of heat, relevant to the energy and chemical industry.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of unfired pressure equipment used in the energy and chemical industry and plant

Word  PDF

Version 2

28161 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to demonstrate knowledge of: unfired pressure equipment used in the energy and chemical industry and plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Apply hazard management and risk assessment procedures used in an energy and chemical plant
This standard is expiring. The last date for assessment to take place is 31 December 2022.

Word  PDF

Version 2 This unit standard was replaced by unit standard 32107.

28284 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This entry-level unit standard is for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: demonstrate knowledge of hazards found and processes for dealing with them, and chemicals found and processes for dealing with them; store and handle chemicals used; and apply risk assessment procedures used, in an energy and chemical plant.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and operate solid handling systems in an energy and chemical plant

Word  PDF

Version 9

3045 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: demonstrate knowledge of solid handling systems; operate solid handling systems; monitor and control solid handling systems; and shut down solid handling systems and carry out post-shutdown checks, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of, interpret, and sketch process drawings for an energy and chemical plant

Word  PDF

Version 9

3047 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: demonstrate knowledge of process drawings used in an energy and chemical plant; interpret process drawings of an energy and chemical plant; and sketch a section of an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of work control procedures in an energy and chemical plant

Word  PDF

Version 1

32028 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to demonstrate knowledge of work control procedures in an energy and chemical plant; and describe the work control removal sequence plan, and communication procedures.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate and apply knowledge of hazards and handling of chemicals in an energy and chemical plant

Word  PDF

Version 1 This unit standard replaced unit standard 28284.

32107 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: identify hazards, describe control measures, and work safely in an energy and chemical plant; describe chemicals used in an energy and chemical plant and processes for dealing with hazards related to handling chemicals; and describe procedures and associated documentation for receiving, storing, and handling chemicals used in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe, operate, and monitor pumps, fans, and compressors used in an energy and chemical plant

Word  PDF

Version 8

4553 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: describe pumps, fans and compressors used in the energy and chemical industry; and operate and monitor pumps, fans, and compressors in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of tanker loading and safety equipment, and load product in an energy and chemical plant

Word  PDF

Version 6

9582 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: describe the function of energy and chemical tanker loading and safety equipment; prepare for loading product to a tanker; load product to a tanker and identify and rectify any deviations from normal operating conditions; and shutdown, document, and communicate the product loading process.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and conduct pigging activities in an energy and chemical pipeline

Word  PDF

Version 6

9585 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of pigging, and load a pig into a launcher in a pipeline; launch a pig into a pipeline; receive a pig in a pipeline; and unload a pig from a pig receiver in a pipeline, reinstate the receiving system, and record and report findings.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Prepare for and transfer energy and chemical bulk product by pipeline

Word  PDF

Version 6

9586 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: prepare for the transfer of energy and chemical bulk product; carry out and monitor the transfer of energy and chemical bulk product by pipeline; and shut down and document the transfer of energy and chemical bulk product by pipeline.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe chemical mixing safety, and use chemicals for batch production in an energy and chemical plant

Word  PDF

Version 6

9607 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for boiler operators and energy and chemical process operators. People credited with this unit standard are able to: describe safety requirements for mixing chemicals in an energy and chemical plant; prepare to mix chemicals for batch production; mix and use chemicals for batch processing operations; and complete the batch; in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe and use energy and chemical industry documentation

Word  PDF

Version 6

9618 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: identify and describe energy and chemical industry documentation; and use and record information to meet energy and chemical plant and process requirements.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Level 4

Demonstrate knowledge of and operate primary treatment systems for effluent water in an energy and chemical plant

Word  PDF

Version 7

17604 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to demonstrate knowledge of: primary treatment equipment and processes for effluent water in the energy and chemical industry; and primary treatment of effluent water in an energy and chemical plant; operate primary treatment equipment and processes for effluent water; and interpret and act on effluent water quality data, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Operate and maintain refrigerated air conditioning equipment on energy and chemical plant
This standard has expired and is no longer available.

Version 6

17606 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of refrigeration equipment used in air conditioning systems on energy and chemical plant; operate and maintain a refrigerated air conditioning system; and identify, explain, and respond to deviations in refrigerated air conditioning equipment, at an energy and chemical plant.

Standard-setting body:

Primary Industry Training Organisation (NZITO) Primary Industry Training Organisation

Demonstrate knowledge of and operate sludge treatment systems for effluent water in an energy and chemical plant

Word  PDF

Version 7

17608 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: demonstrate knowledge of sludge resulting from effluent treatment in the energy and chemical industry; and the system, equipment and processes used in the treatment of sludge in an energy and chemical plant. They are also able to: operate sludge treatment equipment and associated processes; and take and analyse samples, interpret and document sludge treatment system data, and carry out required actions in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe and operate geothermal binary plant in the energy and chemical industry

Word  PDF

Version 7

17609 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to describe: geothermal binary plant processes and equipment used in the energy and chemical industry; and the operation of geothermal binary plant and identify deviations from normal operating parameters. They are also able to operate a geothermal binary plant in the energy and chemical industry.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe and operate pre-treatment systems for effluent water in an energy and chemical plant

Word  PDF

Version 7

17610 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to describe: pre-treatment equipment and processes for effluent water in the energy and chemical industry; and effluent pre-treatment discharge requirements, water treatment chemicals, and protection systems in an energy and chemical plant. They are also able to: operate the effluent pre-treatment equipment and processes for biological effluent water treatment; and collect and interpret data for effluent water quality, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and operate biological treatment systems for effluent water in an energy and chemical plant

Word  PDF

Version 7

17611 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to demonstrate knowledge of: biological effluent water treatment in the energy and chemical industry; and equipment and processes for biological effluent water treatment in an energy and chemical plant. They are also able to operate biological treatment equipment and processes for biological effluent water treatment; and interpret and act on effluent water quality data, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Operate equipment for distillation in an energy and chemical plant

Word  PDF

Version 4 This unit standard and unit standard 18423 replaced unit standard 9615.

18733 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working in an energy and chemical plant who operate complex plant from a panel. People credited with this unit standard are able to: operate energy and chemical distillation equipment in stable conditions; and identify and describe responses to deviations from stable conditions in an energy and chemical process.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and operate refrigeration equipment in an energy and chemical plant

Word  PDF

Version 5

21454 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: describe refrigeration systems used in the energy and chemical industry; demonstrate knowledge of the operation of refrigeration equipment in an energy and chemical plant; and operate refrigeration equipment in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe purging, and purge systems in an energy and chemical plant

Word  PDF

Version 5

21455 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to describe: the purpose and methods of purging; and site-specific purging media in the energy and chemical industry. They are also able to purge systems in an energy and chemical plant and verify the status.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and operate systems for boiler feedwater treatment

Word  PDF

Version 5

21456 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to demonstrate knowledge of: boiler feedwater treatment processes; the effects of boiler feedwater treatment systems; and a boiler feedwater treatment system, used in an energy and chemical plant. They are also able to operate boiler feedwater treatment equipment and processes; and interpret and act on water quality data for a boiler feedwater treatment system, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of the principles of isolating and isolate and reinstate a section of an energy and chemical plant

Word  PDF

Version 5

21457 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and process operators in an energy and chemical plant. People credited with this unit standard are able to: demonstrate knowledge of the principles of isolating a section of an energy and chemical plant; isolate; and prepare for and reinstate a section of an energy and chemical plant and describe the impact of isolation on the process.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Operate a steam turbine in an energy and chemical plant
This standard is expiring. The last date for assessment to take place is 31 December 2022.

Word  PDF

Version 5 This unit standard was replaced by unit standard 32061.

21458 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is for people working as boiler operators and energy and chemical process operators in an energy or chemical plant. People credited with this unit standard are able to: demonstrate knowledge of steam turbines used in the energy and chemical industry, and operational procedures for a steam turbine; and operate a steam turbine, in an energy and chemical plant.

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Meet requirements of person responsible for an unattended small steam or hot water boiler

Word  PDF

Version 6

21460 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for operators who are responsible for an unattended, small steam or hot water boiler as defined in the Approved Code of Practice for the Design, Safe Operation, Maintenance and Servicing of Boilers, sections 4, 5, 7 and 8 respectively. People credited with this unit standard are able to: demonstrate knowledge of the requirements for the supervision and operation of unattended small steam or hot water boilers; demonstrate knowledge of a site steam or hot water boiler; operate and monitor an unattended boiler; demonstrate knowledge of water treatment systems and chemicals, potential hazards of boiler water treatment chemicals, consequences of incorrect water treatment, returned condensate systems, and spill handling procedures for chemicals; and operate and monitor the boiler feedwater system for an unattended boiler.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and perform boiler plant operations

Word  PDF

Version 6

21463 Unit Standard 15 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators under the Approved Code of Practice for the Design, Safe Operation, Maintenance and Servicing of Boilers. People credited with this unit standard are able to demonstrate knowledge of: the requirements of the Code; a boiler plant; and operational procedures for a boiler plant. They are also able to: operate; monitor, and control a boiler plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe and operate pumps in an energy and chemical plant

Word  PDF

Version 5

21465 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to describe: pumps used in an energy and chemical plant; and the operation of pumps in an energy and chemical plant. They are also able to operate pumps in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe and operate compressors in an energy and chemical plant

Word  PDF

Version 5

21466 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to describe: compressors used in an energy and chemical plant, and compressor operational deviations; and demonstrate knowledge of control and protection systems of compressors in an energy and chemical plant. They are also able to operate compressors in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of geothermal processes and equipment in an energy and chemical plant

Word  PDF

Version 2 This unit standard and unit standard 28160 replaced unit standard 17607.

28159 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to demonstrate knowledge of: geothermal energy and reservoirs; implications of geothermal fluid chemistry; and steam-field equipment and processes, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Operate geothermal steam-field equipment and processes in an energy and chemical plant

Word  PDF

Version 2 This unit standard and unit standard 28159 replaced unit standard 17607.

28160 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to operate geothermal steam-field equipment and processes in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe hazard management, and apply and monitor risk assessment procedures in an energy and chemical plant

Word  PDF

Version 2

28283 Unit Standard 5 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: identify sources and effects of hazards and Identify sources and effects of hazards and describe hazard management procedures used in an energy and chemical plant; and apply and monitor risk assessment procedures, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe and operate valves in an energy and chemical plant

Word  PDF

Version 9

3032 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and process operators in an energy and chemical plant. People credited with this unit standard are able to: describe valves used in the energy and chemical industry and prevention of problems from incorrect valve operation, describe valve security; and operate valves, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Operate pumps, compressors and fans in a chemical and energy environment
This standard has expired and is no longer available.

Version 5 This unit standard has been replaced by unit standard 21465 and unit standard 21466.

3033 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of different types of pumps, compressors and fans encountered in the energy and chemical industry; operate pumps, compressors and fans; and identify and respond to deviations from normal conditions. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Demonstrate knowledge of and operate fired pressure equipment in an energy and chemical plant

Word  PDF

Version 10

3035 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: demonstrate knowledge of fired pressure equipment used in the energy and chemical industry, and fired pressure equipment used in an energy and chemical plant; locate fired pressure equipment and control systems, and operate fired pressure equipment; and monitor and control fired pressure equipment, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and operate unfired pressure equipment in an energy and chemical plant

Word  PDF

Version 9

3036 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: describe unfired pressure equipment used in the energy and chemical industry; demonstrate knowledge of on-site unfired pressure equipment; and locate and operate unfired pressure equipment in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Operate refrigeration equipment and control processes in an energy and chemical environment
This standard has expired and is no longer available.

Version 5 This unit standard and unit standard 5869 have been replaced by unit standard 21454.

3038 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of refrigeration equipment encountered in the energy and chemical industry; operate refrigeration equipment; and identify and respond to deviations from normal conditions. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Purge systems in an energy and chemical environment
This standard has expired and is no longer available.

Version 5 This unit standard has been replaced by unit standard 21455.

3039 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the purpose of purging and the different types of purge method used in the energy and chemical industry; purge systems; and identify and respond to deviations from normal conditions. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate raw water treatment systems in an energy and chemical environment
This standard has expired and is no longer available.

Version 6

3040 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the different types of raw water treatment equipment and processes encountered in the energy and chemical industry; operate raw water treatment processes; and collect and interpret data. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

Primary Industry Training Organisation (NZITO) Primary Industry Training Organisation

Operate boiler feed water treatment systems (above 20 MW) in an energy and chemical environment
This standard has expired and is no longer available.

Version 6 This unit standard has been replaced by unit standard 21456.

3041 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are, for plant at or above 20 megawatt (MW), able to: demonstrate knowledge of the different types of boiler feed water treatment equipment and process encountered in the energy and chemical industry; operate boiler feed water treatment equipment and processes; and collect and interpret data. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate effluent water treatment systems in an energy and chemical environment
This standard has expired and is no longer available.

Version 4

3042 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to operate effluent water treatment equipment and processes, and demonstrate knowledge of the principles of treatment and statutory requirements for the effluent.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Isolate and recommission systems in an energy and chemical environment
This standard has expired and is no longer available.

Version 5 This unit standard has been replaced by unit standard 21457.

3043 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of the purposes of isolating and recommissioning process systems and the different methods used and isolate and recommission process systems. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate steam turbines in an energy and chemical environment
This standard has expired and is no longer available.

Version 5 This unit standard and unit standard 4558 have been replaced by unit standard 21458.

3044 Unit Standard 14 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the different types of steam turbines encountered in the energy and chemical industry; operate steam turbines; and identify and respond to deviations from normal conditions. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Demonstrate knowledge of and operate product storage equipment in an energy and chemical plant

Word  PDF

Version 9

3048 Unit Standard 8 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: demonstrate knowledge of product storage equipment and systems in an energy and chemical plant; and the product storage system, and malfunctions, deviations, and faults of product storage equipment and systems in an energy and chemical plant. They are also able to operate the product storage system in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Carry out controlled start up and shut down procedures in an energy and chemical environment
This standard has expired and is no longer available.

Version 5

3049 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of the general principles of starting up and shutting down plant and systems, and simulate plant or system start up and shut down. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Operate control systems in an energy and chemical environment
This standard has expired and is no longer available.

Version 5

3050 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of the different types of control systems encountered in the energy and chemical industry; operate control systems; and identify and correct deviations from normal conditions. This unit standard is for occupations such as boiler operators and petrochemical process operators whose role can include all or some of the following: steam generation, water treatment, hydrocarbon processing and electrical generation in industries including petrochemical, power generation, dairy processing, meat processing, timber processing and other steam users.

Standard-setting body:

NZ Motor Industry Training Organisation - NZ Extractive ITO - Steam and Hazardous Gases Primary Industry Training Organisation

Demonstrate knowledge of heat transfer and exchange, and operate heat exchange equipment in an energy and chemical plant

Word  PDF

Version 9

3051 Unit Standard 7 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to demonstrate knowledge of: heat transfer and heat exchange equipment in the energy and chemical industry, and activities to optimise heat exchanger operation; and operate heat exchange equipment in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and operate a gas turbine in an energy and chemical plant

Word  PDF

Version 9

3053 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to demonstrate knowledge of gas turbines and combustion in the energy and chemical industry; and operational responses to deviations and equipment malfunctions for gas turbines; and operate a gas turbine in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe the properties and use of engineering materials used in an energy and chemical plant primary process

Word  PDF

Version 1

32031 Unit Standard 3 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to describe: the characteristics of engineering materials used in an energy and chemical plant; the chemical, physical, and mechanical properties of engineering materials used in an energy and chemical plant, and methods for determining properties; and the applications and factors influencing selection of engineering materials used in an energy and chemical plant primary process.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe, operate, and monitor a generator and associated systems in an energy and chemical plant

Word  PDF

Version 1

32032 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as energy and chemical process operators in an energy and chemical plant. People credited with this standard are able to describe in relation to an energy and chemical plant generator: electrical power; magnets and magnetism; how the production of electromagnetic force (EMF) is induced and managed; alternating current (AC) generation; direct current (DC) generation; and generator operation and associated controls. They are also able to operate and monitor a generator and associated systems in an energy and chemical plant

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe, carry out, and receive shift to shift handover of operational plant in the energy and chemical industry

Word  PDF

Version 1

32033 Unit Standard 4 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: describe the purpose of and plan for shift to shift handover of operations; and carry out and receive shift to shift handover of operational plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and operate a steam turbine in an energy and chemical plant

Word  PDF

Version 1 This unit standard replaced unit standard 21458.

32061 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: describe steam turbine design concepts and operating principles; demonstrate knowledge of steam turbine steam flow, control systems and supervisory protection; and demonstrate knowledge of operational procedures for a steam turbine; in an energy and chemical plant. They are also able to operate a steam turbine in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and manage product storage and transfer facilities in an energy and chemical plant

Word  PDF

Version 6

9583 Unit Standard 6 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to demonstrate knowledge of energy and chemical plant storage facilities and associated equipment; manage energy and chemical plant product storage and transfer facilities and monitor conditions and products; and document and communicate product storage and transfer facility details in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and operate product separation equipment to separate product in an energy and chemical plant

Word  PDF

Version 6

9587 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of separation equipment in an energy and chemical plant; separate product; and identify corrective actions for deviations from stable conditions, and emergency situations and procedures in a product separation process, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Level 5

Describe and carry out process start-up and shutdown in an energy and chemical plant

Word  PDF

Version 2

28162 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for experienced people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to describe: systems for routine process start-up, and common deviations from operating parameter changes; systems for routine process shutdown, and expected parameter deviations during shutdown; and causes, impacts of, and systems for emergency or unplanned process shutdown, in an energy and chemical plant. They are also able to carry out a process start-up and shutdown, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe and control normal and abnormal process conditions in an energy and chemical plant, and recommend improvements

Word  PDF

Version 2

28163 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for experienced people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to describe: the distributed control system and alarms used; and the control of process conditions to ensure process efficiencies, product quantity and product quality in an energy and chemical plant. They are also able to: control normal process conditions to ensure process efficiencies and product quality; identify and determine implications of abnormal process conditions; respond to abnormal process conditions; review response to abnormal process conditions and identify and recommend improvements, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Describe and apply a safe work management system in an energy and chemical plant

Word  PDF

Version 2

28164 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for experienced people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: describe the safe work management system; and identify and develop work control documentation. They are also able to control the safe work management system, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Coordinate an outage in a complex energy and chemical plant

Word  PDF

Version 2

28165 Unit Standard 30 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for experienced people working as supervisors of boiler and energy and chemical process operators or advanced technical personnel in an energy and chemical plant. People credited with this unit standard are able to: contribute to a plan for the outage; coordinate the operational shutdown and plant isolation; coordinate operational components during the execution of the outage plan; coordinate the commissioning and testing of equipment and plant; coordinate the plant handover and start-up; contribute to the outage debriefing; and evaluate own performance in coordinating operational components of the outage plan, in a complex energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Analyse commercial operational compliance and risks and develop a risk action plan in an energy and chemical plant

Word  PDF

Version 2

28166 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for experienced people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: analyse the value chain, determine customer expectations, and analyse the implications of not meeting customer expectations; analyse commercial operational risks, identify risk control measures and develop a risk action plan for implementation; and analyse commercial operational compliance requirements, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and review process safety incidents in an energy and chemical plant

Word  PDF

Version 2

28167 Unit Standard 10 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for experienced people working as boiler operators and energy and chemical process operators in an energy and chemical plant. People credited with this unit standard are able to: demonstrate knowledge of the application of process safety; the role of operations staff in process safety, and procedures to disable or override engineered safety devices and systems; and identify the standard used for reporting process safety incidents and severity criteria, and review previous process safety incidents and actions taken, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of, operate, and monitor an advanced steam generation process

Word  PDF

Version 10

3037 Unit Standard 20 Credits

View Education Organisations with Consent to Assess  »

This unit standard is intended for experienced people working as boiler operators in a steam generation plant. People credited with this unit standard are able to: demonstrate knowledge of an advanced steam generation process, describe air systems and fuel types used in an advanced steam generation process; describe scientific principles relating to steam generation, and demonstrate knowledge of an advanced steam generation process in an energy and chemical plant. They are also able to: operate an advanced steam generation process; and monitor and control an advanced steam generation process, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Demonstrate knowledge of and control emergency and unplanned shutdowns in an energy and chemical plant

Word  PDF

Version 6

9616 Unit Standard 12 Credits

View Education Organisations with Consent to Assess  »

People credited with this unit standard are able to: demonstrate knowledge of systems for emergency and/or unplanned shutdowns; manage an emergency or unplanned shutdown; check plant and equipment are safe following an unplanned shutdown and identify the reason or cause of the shutdown; and document the shutdown process and report any ongoing production problems, in an energy and chemical plant.

Consent & Moderation Requirements:

CMR 79 Word PDF

Standard-setting body:

Hanga-Aro-Rau Manufacturing, Engineering and Logistics Workforce Development Council Primary Industry Training Organisation

Data as at 19 May 2022